Bedienungsanleitung Festool LEX 3 125 3 (Seite 18 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499937

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

LEX 3

In order to prevent damage to the

pneumatic motor, dust extraction must

not be carried out on the pneumatic

tool when it is at standstill.

8 Working with the machine

Please observe all mentioned safety in-

formations and the following rules

when working:

– Always secure the workpiece in such a

manner that it cannot move while being

processed.

For work that generates dust, wear a

dust mask.

9 Service and maintenance

Customer service and repair

only through manufacturer or

service workshops: Please find

the nearest address at:

www.festool.com/Service

Use only original Festool spare

parts! Order No. at:

www.festool.com/Service

9.1Vanes

We recommend replacing the vanes of the

motor at the following intervals:

– Lubricated operation: Approx. 2,000 h

– Non-lubricated operation: Approx. 600 h

9.2 Replacing the silencer

In order to maintain the power and perfor-

mance of the compressed air tool, replace

the silencer on the IAS hose systems at reg-

ular intervals.

9.3 Sanding pad brake

The rubber sleeve

[5-1]

brushes off the

sanding pad and prevents uncontrolled turn-

ing of the sanding pad. This must be replaced

if the braking effect decreases.

9.4 Cleaning the extraction channels

We recommend cleaning the extraction

channels in the machine roughly once a week

(particularly if sanding synthetic resin, in the

case of wet sanding and if sanding plaster)

[5-2]

using a small flat brush or a cloth.

10 Accessories

The order numbers of the accessories and

tools can be found in the Festool catalogue or

on the Internet under "www.festool.com".

11 Environment

Do not dispose of the device in

household waste!

Recycle de-

vices, accessories and packaging.

Observe applicable country-spe-

cific regulations.

EU only:

European Directive 2002/96/EC stip-

ulates that used electric power tools must be

collected separately and disposed of at an en-

vironmentally responsible recycling centre.

Information on REACh:

www.festool.com/

reach

12 EU Declaration of Conformity

We declare under sole responsibility that this

product complies with the following direc-

tives and standards:

DIN EN ISO 11148-8 i.a.w. the provisions of

2006/42/EC Directive.

Festool GmbH

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Johannes Steimel

Head of Research, Development and Techni-

cal Documentation

29.02.2012

WARNING

Risk of injury

The machine should always be disconnect-

ed from the compresses air supply before

any work is carried out on the machine.

All maintenance and repair work which re-

quires the motor casing to be opened may

only be carried out by an authorised ser-

vice centre.

EKAT

Compressed air eccentric

sander

Serial no.

LEX 3 77/2.5 496675

LEX 3 125/3 496890

LEX 3 125/5 496891

LEX 3 150/3 496886

LEX 3 150/5 496887

Year of CE mark: 2012

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool LEX 3 125 3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info