Bedienungsanleitung Festool LS 130 EQ DUPLEX (Seite 8 von 50) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

498079

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

speciﬁ ed time period. This may signiﬁ cantly reduce

the load during the machine operating period.

3 Power supply and start-up

The mains voltage must correspond to the

speciﬁ cation on the rating plate.

Switch (1.2) serves as an On/Off switch. It may be

latched with the locking knob on the side (1.1) for

continuous operation. Pressing the switch again

releases the lock.

Always switch the machine off before con-

necting or disconnecting the mains lead!

See Fig. 2 for connection and disconnection of the

power cable.

4 Electronics

The LS 130 EQ has an electronic control

with which the rotational speed can be

varied step-free.

This allows the sanding speed to be adapted to the

optimum level according to the material concerned

(see “Working with the machine“).

The speed is set using the rotary control button

(1.3).

5 Machine settings

Always remove the power supply plug from

the socket before carrying out any work on

the machine.

5.1 Dust extraction

Always connect the machine to a dust

extractor when performing work that

generates dust.

You can connect a Festool extractor with an ex-

tractor hose diameter of 27 mm to the extractor

connector (1.4).

5.2 Changing the sanding pad

In order to be able to sand various proﬁ les, Festool

offers shaped sanding pads. These sanding pads

can be changed quickly and easily without tools.

Removing the sanding pad (Fig. 3)

- Push the sanding pad forwards (e.g. by pressing

the rear edge of the sanding pad against a ﬂ at

surface),

- keep the sanding pad pressed forwards and

swivel the front edge of the sanding pad away

from the tool,

- release the pressure slightly, remove the sanding

pad from the rear.

The new sanding pad is ﬁ tted in the reverse order.

Make sure that the four lugs (3.1) of the sanding

base catch in the four recesses (3.2) in the sand-

ing pad.

To ensure a better grip of the sanding pad on the

sanding base of the LS 130 EQ you can fasten the

sanding pad in the four holes in the corners (1.7)

using the enclosed screws. These screws have to

be removed before exchanging sanding pads.

5.3 Attaching sanding material

For your own safety, use only original Fes-

tool accessories and spare parts.

Self-adhesive abrasives such as Stickﬁ x

sandpaper and sanding ﬂ eeces can be

attached to Stickﬁ x sanding shoes.

The abrasives (1.5) are simply pressed onto the

sanding shoe (1.6) and pulled off after use.

6 Working with the machine

Never overload the tool by using too much

pressure!

The best sanding results are achieved when apply-

ing moderate pressure. The sanding performance

and quality depend mainly on the choice of the right

sanding material.

Festool offers the appropriate accessories, sanding

and polishing attachments for every application.

Metalworking

The following precautions are to be taken

when processing metals for safety rea-

sons:

- Pre-connect a residual current circuit-breaker

(FI, PRCD).

- Connect the machine to a suitable dust extractor.

- Clean tool regularly of dust accumulations in the

motor housing.

Wear protective goggles.

Speed adjustment

We recommend the following settings on the rotary

control (1.3) for electronic tools:

Rotary control setting

- sanding work

3 - 6

- sanding old paint

- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces

- sanding proﬁ led workpieces of natural wood

- sanding of thinly applied primer

- smoothing primed wooden surfaces.

- sanding full wooden and veneer edges

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool LS 130 EQ DUPLEX Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info