Bedienungsanleitung Festool MXC (Seite 10 von 47) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

497598

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

MXC

6Operation

6.1 Charging the battery pack [1]

Charge only battery packs that are desig-

nated for use with the charger. (see Techni-

cal data)!

The LED

[1-3]

on the charger indicates the respec-

tive operating status of the charger.

LED yellow - lit continuously

Charger is ready to use.

LED green - flashing quickly

Battery pack will be charged with max. current.

LED green - flashing slowly

Battery Pack is charged to 80 % and will be charged

with further reduced current.

LED green - lit continuously

Battery pack is fully charged.

LED red - lit continuously

Battery temperature is outside the permitted range

(0 °C to 45 °C).

LED red - flashing

General fault display, e. g. incomplete contact,

short circuit, battery pack faulty, etc.

6.2 Charger wall mount

The charger MXC has two elongated holes on its

back. It can be mounted on a wall using two screws

(e.g. round head or flat head screw with shank di-

ameter of 5 mm) (see Fig.

[1]

7 Service and maintenance

Observe the following instructions:

– Keep the air slits on the machine and the charger

free and clean to ensure adequate cooling.

– Keep the contacts on the machine, charger and

battery pack clean.

8 Accessories

Use only original Festool accessories and Festool

consumable material intended for this machine be-

cause these components are designed specifically

for the machine. Using accessories and consum-

able material from other suppliers will most likely

affect the quality of your working results and limit

any warranty claims. Machine wear or your own

personal workload may increase depending on the

application. Protect yourself and your machine, and

preserve your warranty claims by always using

original Festool accessories and Festool consum-

able material!

The order numbers of the accessories and tools can

be found in the Festool catalogue or on the Internet

under "www.festool.com".

9 Disposal

Do not throw the tool in your household waste!!

Dispose of machines, accessories and packaging at

an environmentally responsible recycling centre.

Observe the valid national regulations.

EU only:

European Directive 2002/96/EC stipulates

that used electric tools must be collected separate-

ly and disposed of at an environmentally responsi-

ble recycling centre.

10 Warranty

We offer a warranty for material and production de-

fects for all our tools in accordance with the locally

applicable legal provisions, but for a minimum of 12

months. Within the EU member states, the warran-

ty period is 24 months (verification through invoice

or delivery note). Damage caused by the operator,

natural wear, overloading, incorrect handling or

through the use of the equipment not specified in

the operating manual, or damage which was known

at the time of purchase, is not covered by the war-

ranty. Furthermore, damage caused by the use of

non-original accessories and consumable materi-

als (e.g. sanding pads) is also excluded.

Complaints can only be accepted if the tool is re-

turned while still assembled to the supplier or an

authorised Festool Customer Service workshop.

Keep the operating manual, safety instructions,

spare parts list and purchase receipt in a safe

place. Otherwise the current warranty conditions of

the manufacturer shall apply.

Note

Due to continuous research and development work,

we reserve the right to make changes to the techni-

cal content of this documentation.

WARNING

Unauthorised voltage or frequency!

Risk of accident



The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.



In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool MXC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info