Bedienungsanleitung Festool of 1400 ebq plus (Seite 17 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

426963

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

- Secure the copying ring (8.1) to the router base

by inserting both tenons (8.2) into the recesses

(8.3).

- To loosen the copying ring, press both buttons

(1.16) inwards simultaneously.

b) Copying device

The angle arm WA-OF (10.2) and copier scanning

set KT-OF, consisting of roller holder (10.6) and

three copying rollers (10.7), are required for the

copying device.

- Screw the angle arm at the desired height in the

platen’s threaded bore (10.1) with the rotating

knob (10.3).

- Fit a copying roller in the roller holder and bolt

this to the angle arm with the rotating knob

(10.5). Make sure that the copying roller and

cutter have the same diameter!

- Turn the adjusting wheel (10.4) to adjust the dis-

tance between the copying roller and cutter axis.

7 Accessories

For your own safety, use only original

Festool accessories and spare parts.

Festool offers extensive accessories that enable

you to use your machine effectively for a wide

variety of applications, e.g.: routing circle, guide

rails with rows of holes, routing aid, router base

for bench-mounted use.

The accessory and tool order number can be found

in the Festool catalogue or on the Internet under

„www.festool.com“.

8 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

All maintenance and repair work which

requires the motor casing to be opened

may only be carried out by an authorised

service centre.

The cool air openings in the motor casing must

always be kept clean and unobstructed to ensure

air circulation.

The tool is ﬁ tted with special motor brushes with

an automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

To alter the position of the clamping lever (see

Fig. 11):

- Release the screw.

- Remove the clamping lever and tighten the

hexagon screw.

- Insert the clamping lever again in the desired

position and lock it with the screw.

9 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally-responsible

recycling centre. Observe the valid national regu-

lations.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

10 Warranty

Our equipment is under warranty for at least 12

months with regard to material or production

faults in accordance with national legislation.

In the EU countries, the warranty period is 24

months (an invoice or delivery note is required

as proof of purchase). Damage resulting from,

in particular, normal wear and tear, overloading,

improper handling, or caused by the user or other

damage caused by not following the operating

instructions, or any fault acknowledged at the

time of purchase, is not covered by the warranty.

Damage caused by the use of non-original ac-

cessories and consumable material (e.g. sand-

ing pads) is also excluded. Complaints will only

be acknowledged if the equipment has not been

dismantled before being sent back to the suppli-

ers or to an authorised Festool customer support

workshop. Store the operating instructions, safety

notes, spare parts list and proof of purchase in a

safe place. In addition, the manufacturer‘s current

warranty conditions apply.

Note

We reserve the right to make changes to the tech-

nical data contained in this information as a result

of ongoing research and development work.

REACH for Festool products, their accessories

and consumables

REACh is a European Chemical Directive that

came into effect in 2007. As “downstream users”

and product manufacturers, we are aware of our

duty to provide our customers with information.

We have set up the following website to keep you

updated with all the latest news and provide you

with information on all the materials used in our

existing products: www.festool.com/reach

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool of 1400 ebq plus Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info