Bedienungsanleitung Festool ps 200 (Seite 13 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

382427

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

TRION

tion where the cutting accessory may

contact hidden wiring or its own cord.

Cutting accessory contacting a "live" wire

may make exposed metal parts of the pow-

er tool "live" and could give the operator an

electric shock.

–

Festool electric power tools must only

be installed on work tables provided

by Festool for this purpose.

If the tool is

installed in another, or self-made, work ta-

ble, it can become unstable and result in

serious accidents.

–

Wait until the power tool stops com-

pletely until placing it down.

The tool

can become entangled and lead to a loss of

control of the power tool.

– Deformed or cracked saw blades and saw

blades with blunt or broken cutting edges

must not be used.

– Always place the pendulum jigsaw on the

workpiece with the saw blade running.

– Wear suitable protection such as ear pro-

tection, safety goggles, a dust mask for

work which generates dust, and protective

gloves when working with raw materials

and when changing tools.

– Always secure the workpiece in such a

manner that it cannot move while being

sawed.

– Always connect the machine to a dust ex-

tractor when work involves dust genera-

tion.

– Check the plug and the cable regularly and

should either become damaged, have

them replaced by an authorised after-sales

service workshop.

4.3 Metalworking

The following precautions are to be

taken when processing metals for

safety reasons:

– Pre-connect a residual current circuit-

breaker (FI, PRCD).

– Connect the machine to a suitable dust ex-

tractor.

– Clean tool regularly of dust accumulations

in the motor housing.

5 Emission levels

The typical values determined in accordance

with EN 60745 are:

Vibration emission value a

(vector sum for

three directions) and uncertainty K mea-

sured in accordance with EN 60745:

The emission values specified (vibration,

noise) were measured in accordance with the

test conditions stipulated in EN 60745 and

are intended for machine comparisons. They

are also used for making preliminary esti-

mates regarding vibration and noise loads

during operation.

The emission values specified refer to the

main applications for which the power tool is

used. If the electric power tool is used for

other applications, with other tools or is not

maintained sufficiently prior to operation,

however, the vibration and noise load may be

higher when the tool is used. Take into ac-

Wear protective goggles.

PS 300 Q, PSB 300 Q

Sound-pressure leve L

= 86 dB(A)

Sound-power level L

= 97 dB(A)

Measuring uncertainty

allowance

K = 3 dB

PS 300 EQ, PSB 300 EQ

Sound-pressure leve L

= 83 dB(A)

Sound-power level L

= 94 dB(A)

Measuring uncertainty

allowance

K = 3 dB

CAUTION

Operating noise

Damage to hearing

Wear ear protection!

Sawing wood

Handle (PS 300 Q, PSB 300

Q, PS 300 EQ, PSB 300 EQ)

= 4.5 m/s

K = 2.0 m/s

Gear head (PS 300 Q, PS

300 EQ)

= 7.0 m/s

K = 2.0 m/s

Sawing metal

Handle (PS 300 Q, PSB 300

Q, PS 300 EQ, PSB 300 EQ)

= 3.0 m/s

K = 2.0 m/s

Gear head (PS 300 Q, PS

300 EQ)

= 5.0 m/s

K = 2.0 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ps 200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info