Bedienungsanleitung Festool PS300EQ (Seite 15 von 83) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573106

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

TRION



push base runner approx. 5 mm forwards,



set desired inclination according to the scale

[5-



tighten locking screw

[4-1]

The base runner can be moved back for sawing

close to edges.



Remove chip guard and splinterguard,



release locking screw

[4-1]

with Allen key

[1-4]



push base runner to rear position so that the

centring pin

[5-1]

fits in the opening

[5-3]



tighten locking screw

[4-1]

7.7 Adjusting the pendulum stroke

In order to process different materials with an opti-

mum feed movement the pendulum jigsaws have

an adjustable pendulum stroke. Select the desired

setting with the pendulum stroke switch

[1-5]

setting 0 = pendulum stroke off

setting 3 = maximum pendulum stroke

7.8 Adjusting the number of strokes

PSB 300 Q,

PSB 300 EQ

You can regulate the number of strokes steplessly

between 1000 and 2900 min

-1

using the adjusting

wheel

[1-2; 2-3]

. This enables you to optimise the

cutting speed to suit the material.

8 Working with the machine

8.1 Free hand according to the scribe mark

The triangular shape of the splinterguard

[4-3]

shows the cutting line of the saw blade and thus fa-

cilitates cutting to a scribe mark.

8.2 Plunge cutting without pilot drilling

The base runner must be in the front position for

plunge cuts in timber materials (basic setting, see

Figure

[1]



Place saw on the front edge of the runner.



Set saw to maximum no. of strokes and pendu-

lum stroke setting 3 and start the plunge cut

into the workpiece (Figure

[6]

9 Service and maintenance

Customer service and repair

only

through manufacturer or service

workshops: Please find the nearest

address at: www.festool.com/service

Use only original Festool spare parts!

Order No. at: www.festool.com/service

Damaged safety devices and components must be

repaired or replaced in a recognised specialist

workshop, unless otherwise indicated in the oper-

ating manual.

To ensure constant air circulation, always keep the

cooling air openings in the motor housing clean and

free of any obstruction.

Recommended settings of the pendulum

stroke

Hard and soft wood,chip board, wood

fibre board

1 - 3

Wood core plywood, plywood, plastics 1 - 2

Ceramic 0

Aluminium, NF metals 0 - 2

Steel 0 - 1

Recommended number of strokes (adjusting

wheel setting)

Hard and soft wood, wood core plywood,

plywood, chip board

Wood fibre boards 4 - 6

Plastics 3 - 6

Ceramic, aluminium, NF metals 3 - 5

Steel 2 - 4

WARNING

Risk of injury



Always secure the workpiece in such a manner

that it cannot move while being machined.

WARNING

Risk of injury, electric shock



Always disconnect the mains plug from the

socket before performing maintenance work on

the machine!



All maintenance and repair work which requires

the motor housing to be opened must only be

carried out by an authorised service workshop.

EKAT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PS300EQ Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info