Bedienungsanleitung Festool PS300Q (Seite 13 von 83) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573104

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

TRION

–

Wait until the power tool stops completely until

placing it down.

The tool can become entangled

and lead to a loss of control of the power tool.

– Deformed or cracked saw blades and saw blades

with blunt or broken cutting edges must not be

used.

– Always place the pendulum jigsaw on the work-

piece with the saw blade running.

– Wear suitable protection such as ear protection,

safety goggles, a dust mask for work which gen-

erates dust, and protective gloves when working

with raw materials and when changing tools.

– Always secure the workpiece in such a manner

that it cannot move while being sawed.

– Always connect the machine to a dust extractor

when work involves dust generation.

– Check the plug and the cable regularly and

should either become damaged, in order to avoid

a hazard, have them replaced by an authorised

after-sales service workshop.

4.3 Metalworking

The following precautions are to be taken

when processing metals for safety reasons:

–Pre-connect a residual current circuit-

breaker (FI, PRCD).

– Connect the machine to a suitable dust extractor.

– Clean tool regularly of dust accumulations in the

motor housing.

5 Emission levels

The typical values determined in accordance with

EN 60745 are:

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accor-

dance with EN 60745:

The specified emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

6Operation

Wear protective goggles.

PS 300 Q, PSB 300 Q

Sound-pressure leve L

= 86 dB(A)

Sound-power level L

= 97 dB(A)

Measuring uncertainty allow-

ance

K = 3 dB

PS 300 EQ, PSB 300 EQ

Sound-pressure leve L

= 83 dB(A)

Sound-power level L

= 94 dB(A)

Measuring uncertainty allow-

ance

K = 3 dB

CAUTION

Operating noise

Damage to hearing



Wear ear protection!

Sawing wood

Handle (PS 300 Q, PSB 300 Q,

PS 300 EQ, PSB 300 EQ)

= 4.5 m/s

K = 2.0 m/s

Gear head (PS 300 Q, PS 300 EQ) a

= 7.0 m/s

K = 2.0 m/s

Sawing metal

Handle (PS 300 Q, PSB 300 Q,

PS 300 EQ, PSB 300 EQ)

= 3.0 m/s

K = 2.0 m/s

Gear head (PS 300 Q, PS 300 EQ) a

= 5.0 m/s

K = 2.0 m/s

WARNING

Unauthorised voltage or frequency!

Risk of accident



The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.



In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

PS 300 EQ, PSB 300 EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PS300Q Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info