Bedienungsanleitung Festool PS400EBQ (Seite 20 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573107

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

CARVEX

Set the pendulum stroke [1-12] to 0 - 1.

Set the stroke rate [1-5] to 1 - 5.

Store the centring mandrel in the depot

[10-3].

Semi-stationary sawing with the Festool

CMS system

When combined with the Festool CMS system,

the jigsaw becomes a semi-stationary bench

saw for profiled cuts. See the CMS brochure

for more information.

Install your jigsaw with adaptation table in

the CMS as described in the operating man-

ual for the CMS-PS.

11 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally responsible

recycling centre. Observe the valid national

regulations.

EU only:

European Directive 2002/96/EC stip-

ulates that used electric power tools must be

collected separately and disposed of at an en-

vironmentally responsible recycling centre.

12 Warranty

We offer a warranty for material and produc-

tion defects for all our tools in accordance with

the locally applicable legal provisions, but for

a minimum of 12 months. Within the EU mem-

ber states, the warranty period is 24 months

(verification through invoice or delivery note).

Damage caused by the operator, natural wear,

overloading, incorrect handling or through the

use of the equipment not specified in the op-

erating manual, or damage which was known

at the time of purchase, is not covered by the

warranty. Furthermore, damage caused by the

use of non-original accessories and consum-

able materials (e.g. sanding pads) is also ex-

cluded.

Complaints can only be accepted if the tool is

returned while still assembled to the supplier

or an authorised Festool Customer Service

workshop. Keep the operating manual, safety

instructions, spare parts list and purchase re-

ceipt in a safe place. Otherwise the current

warranty conditions of the manufacturer shall

apply.

Note

Due to continuous research and development

work, we reserve the right to make changes to

the technical content of this documentation.

13 EU Declaration of Conformity

We declare under sole responsibility that this

product complies with the following directives

and standards:

2006/42/EC, 2004/108/EC, EN 60745-1, EN

60745-2-11, EN 55014-1, EN 55014-2, EN

61000-3-2, EN 61000-3-3.

Festool GmbH

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Johannes Steimel

Head of Research, Development and Technical

Documentation

08.02.2010

REACh for Festool products, its accesso-

ries and consumable materials:

REACh is a European Chemical Directive that

came into effect in 2007. As "downstream us-

ers" and product manufacturers, we are aware

of our duty to provide our customers with in-

formation. We have set up the following web-

site to keep you updated with all the latest

news and provide you with information on all

the materials used in our existing products:

www.festool.com/reach

Jigsaw Serial no.

PSB 400 EBQ 496057, 496065

PS 400 EBQ 496056, 496064

Year of CE mark: 2010

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PS400EBQ Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info