Bedienungsanleitung Festool PSB CARVEX 420 EBQ (Seite 14 von 107) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

497993

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

C A R V E X

5 Safety instructions

5.1 General safety instructions

WARNING! Read all safety warnings

and all instructions.

Failure to follow

the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for fu-

ture reference.

The term "power tool" in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

5.2 Machine-related safety instruc-

tions

–

Hold power tool by insulated gripping

surfaces, when performing an opera-

tion where the cutting accessory may

contact hidden wiring or its own cord.

Cutting accessory contacting a "live" wire

may make exposed metal parts of the power

tool "live" and could give the operator an

electric shock.

–

Festool electric power tools must only

be installed on work tables provided by

Festool for this purpose.

If the tool is in-

stalled in another, or self-made, work table,

it can become unstable and result in serious

accidents.

–

Wait until the power tool stops com-

pletely until placing it down.

The tool can

become entangled and lead to a loss of con-

trol of the power tool.

– Deformed or cracked saw blades and saw

blades with blunt or broken cutting edges

must not be used.

– Always place the pendulum jigsaw on the

workpiece with the saw blade running.

– Wear suitable protection such as ear protec-

tion, safety goggles, a dust mask for work

which generates dust, and protective gloves

when working with raw materials and when

changing tools.

– Always secure the workpiece in such a man-

ner that it cannot move while being sawed.

– Always connect the machine to a dust ex-

tractor when work involves dust generation.

– Check the plug and the cable regularly and

should either become damaged, have them

replaced by an authorised after-sales ser-

vice workshop.

–

Stroboscopic light can cause epileptic

seizures.

Do not use this machine if you are

susceptible to epileptic seizures.

– Do not look into the stroboscope light. Look-

ing into the light source can damage your vi-

sion.

5.3 Metalworking

The following precautions are to be tak-

en when processing metals for safety

reasons:

– Pre-connect a residual current circuit-break-

er (FI, PRCD).

– Connect the machine to a suitable dust ex-

tractor.

– Clean tool regularly of dust accumulations in

the motor housing.

5.4 Emission levels

Levels determined in accordance with EN

60745 are typically:

Vibration emission value a

(vector sum for

three directions) and uncertainty K measured

in accordance with EN 60745:

Wear protective goggles.

Sound pressure level L

= 88 dB(A)

Noise level L

= 99 dB(A)

Measuring uncertainty

allowance

K = 3 dB

CAUTION

Operating noise

Damage to hearing

Use ear protection!

PS 420 EBQ PSB 420 EBQ

Sawing wood

Handle a

=6,0 m/s

=10,0 m/s

K = 2,0 m/s

Gear

head

=11,0 m/s

K = 2,0 m/s

Sawing metal

Handle a

=7,0 m/s

=11,0 m/s

K = 2,0 m/s

Gear

head

=12,0 m/s

K = 2,0 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PSB CARVEX 420 EBQ Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info