Bedienungsanleitung Festool PSBC400EB (Seite 22 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573110

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

CARVEX

Recommended when using the circle cutter:

Cut in an anticlockwise direction.

Work at a slow rate of advance.

Set the pendulum stroke [1-11] to 0 - 1.

Set the stroke rate [1-5] to 1 - 5.

Store the centring mandrel in the depot [11-3].

11 Transport

The equivalent amount of lithium in the LiIon

battery pack is less than the applicable limit

value and certified as per UN manual ST/SG/

AC.10/11/rev. 3 part III, subsection 38.3. The

LiIon battery pack is therefore not subject to

national and international dangerous goods

regulations, neither as an individual component

nor as a fitted machine component. However,

dangerous goods regulations may apply when

several battery packs are transported, in which

case you may have to fulfil special conditions.

Refer to ADR special regulation 230 for more in-

formation relevant for the EU.

12 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally responsible

recycling centre. Observe the valid national

regulations.

EU only:

European Directive 2002/96/EC stip-

ulates that used electric power tools must be

collected separately and disposed of at an envi-

ronmentally responsible recycling centre.

Return used or faulty battery packs to your local

specialist retailer, Festool after-sales service or a

designated public waste management facility. The

battery packs will then be recycled. (Observe the

regulations applicable in your country). The bat-

teries must be discharged on return.

EU only:

European Directive 91/157/EEC stip-

ulates that faulty or used battery packs/batter-

ies must be recycled.

13 Warranty

We offer a warranty for material and production

defects for all our tools in accordance with the

locally applicable legal provisions, but for a

minimum of 12 months. Within the EU member

states, the warranty period is 24 months (veri-

fication through invoice or delivery note). Dam-

age caused by the operator, natural wear, over-

loading, incorrect handling or through the use

of the equipment not specified in the operating

manual, or damage which was known at the

time of purchase, is not covered by the warran-

ty. Furthermore, damage caused by the use of

non-original accessories and consumable ma-

terials (e.g. sanding pads) is also excluded.

Complaints can only be accepted if the tool is

returned while still assembled to the supplier or

an authorised Festool Customer Service work-

shop. Keep the operating manual, safety in-

structions, spare parts list and purchase receipt

in a safe place. Otherwise the current warranty

conditions of the manufacturer shall apply.

Note

Due to continuous research and development

work, we reserve the right to make changes to

the technical content of this documentation.

14 EU Declaration of Conformity

We declare under sole responsibility that this

product complies with the following directives

and standards:

2006/42/EC, 2004/108/EC, EN 60745-1, EN EN

60745-2-11, EN 55014-1, EN 55014-2.

We declare under sole responsibility that this

product complies with the following directives

and standards:

2004/108/EC, 2006/95/EC, EN 60335-1, EN EN

60335-2-29, EN 61000-3-2, EN 61000-3-3, EN

61204-3.

Festool GmbH

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Johannes Steimel

Head of Research, Development and Technical

Documentation

08.02.2010

REACh for Festool products, its accessories and consum-

able materials:

REACh is a European Chemical Directive that came into effect

in 2007. As "downstream users" and product manufacturers,

we are aware of our duty to provide our customers with infor-

mation. We have set up the following website to keep you up-

dated with all the latest news and provide you with information

on all the materials used in our existing products: www.fes-

tool.com/reach

Cordless jigsaw Serial no.

PSBC 400 EB 496059

PSC 400 EB 496058

Year of CE mark: 2010

Charger Serial no.

TRC 3 494635, 494636, 494637

Year of CE mark: 2007

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PSBC400EB Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info