Bedienungsanleitung Festool QUADRILL PD 20.4 E (Seite 12 von 75) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

574955

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

Q U A D R I L L

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

2Symbols

3 Machine features

The specified illustrations appear at the beginning

of the Operating Instructions.

4 Intended use

The machine

DR 18/4 E

– was designed for drilling into wood, metal, ce-

ramic and plastic.

PD 20/4 E

– was designed for impact drilling into tiles, con-

crete and masonry as well as

– drilling into wood, metal, ceramic and plastic.

Machines with forward/reverse setting are also

suitable for fastening screws and tapping threads.

The user is liable for improper or non-in-

tended use.

5 Safety instructions

5.1 General safety instructions

WARNING! Read all safety warnings and all

instructions.

Failure to follow the warnings

and instructions may result in electric shock, fire

and/or serious injury.

Save all warnings and instructions for future ref-

erence.

The term "power tool" in the warnings refers to

your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

5.2 Machine-related safety instructions

–

Wear ear protectors when impact drilling.

Expo-

sure to noise can cause hearing loss.

–

Use auxiliary handle(s), if supplied with the

tool.

Loss of control can cause personal injury.

–

Hold power tool by insulated gripping surface,

when performing an operation where the cut-

ting accessory or fastener may contact hidden

wiring or its own cord.

Cutting accessory or fas-

teners contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give

the operator an electric shock.

–

The machine must never be operated when wet

or located in a damp environment.

Connect de-

vices that you intend to use outdoors via an earth

leakage circuit breaker (FI) with a maximum re-

lease current of 30mA. Always use a cable ap-

proved for outdoor use.

–

Wear suitable protection:

such as ear protec-

tion, safety goggles, a dust mask for work which

generates dust, and protective gloves when

working with raw materials and when changing

tools.

CAUTION! Rebound!

Rotation: Switch off device immediately!

– Do not lock the on/off switch permanently!

– Secure the workpiece using clamping devices.

– Check the plug and the cable regularly and

should either become damaged, in order to avoid

Warning of general danger

Risk of electric shock

Read the Operating Instructions/Notes!

Wear ear protection.

Wear a dust mask.

Wear protective goggles.

Do not throw in the household waste.

Fastening / Drilling mode

Impact drilling mode

[1-1]

Bit store

[1-2]

LED light switch

[1-3]

LED lamp

[1-4]

Speed set button

[1-5]

Switch for selecting drilling/fastening or

impact drilling mode (only PD 20/4 E)

[1-6]

Gear switch

[1-7]

On/Off switch

[1-8]

Right/left switch

[1-9]

Mains power cable

[1-10]

Belt clip

[1-11]

Additional handle

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool QUADRILL PD 20.4 E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info