Bedienungsanleitung Festool rs 200 eq (Seite 12 von 62) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389497

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Unperforated abrasives can be perforated with

the „Lochﬁ x“ (accessory).

- Replace the Stickﬁ x sanding pad with a sanding

pad for abrasives for clamping,

- Secure an abrasive sheet in place using the

two clamping devices. Press the levers (1.12) to

release the clamping devices.

Once clamped in position, make sure the

abrasive paper is taut and sits ﬂ at on the

sanding pad.

5.4 Auxiliary handle

The auxiliary handle (1.13) can be attached for

tasks where the front edge of the sanding pad

sands up to edges.

6 lnstructions on application

Never overload the tool by using too much pres-

sure! The best sanding results are achieved

when applying moderate pressure. The sanding

performance and quality depend mainly on the

choice of the right sanding material.

We recommend the following settings on the ro-

tary control (1.2) for electronic machines:

rotary control setting

- sanding work

5 - 6

- sanding with max. drive

- sanding old paint

- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces

4 - 5

- sanding of thinly applied primer

- sanding of wood with sanding vlies

- sanding edges on wooden parts

- smoothing primed wooden surfaces.

3 - 4

- sanding full wooden and veneer edges

- sanding in the grooves/rebates of windows and

doors

- interim paint sanding on edges

- pre-sanding natural wood windows with sanding

vlies

- smoothing wood surfaces with sanding felt prior

to staining

- rubbing down stained surfaces with sanding

vlies

- rubbing down or removing excess lime paste with

sanding vlies

2 - 3

- interim paint sanding on stained surfaces

- cleaning natural wood window grooves with sand-

ing felt

1 - 2

- sanding stained edges

- sanding thermoplastic synthetics

Metalworking

The following precautions are to be taken

when processing metals for safety rea-

sons:

- Pre-connect a residual current circuit-breaker

(FI, PRCD).

- Connect the machine to a suitable dust extrac-

tor.

- Clean tool regularly of dust accumulations in the

motor housing.

Wear protective goggles.

7 Accessories

Use only original Festool accessories and Festool

consumable material designed for this machine

because these system components are designed

speciﬁ cally for the machine. Using accessories

and consumable material from other suppliers

will most likely affect the quality of your working

results and limit any warranty claims. Machine

wear or your own personal workload may increase

depending on the application. Protect yourself and

your machine, and preserve your warranty claims

by always using original Festool accessories and

Festool consumable material!

The order numbers of the accessories and tools

can be found in the Festool catalogue or on the

Internet under “www.festool.com”.

8 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

The cool air openings in the motor casing must

always be kept clean and unobstructed to ensure

air circulation.

All maintenance and repair work which requires

the motor casing to be opened may only be carried

out by an authorised service centre.

The tool is ﬁ tted with special motor brushes with

an automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool rs 200 eq Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info