Bedienungsanleitung Festool rs 300 q (Seite 12 von 62) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389662

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Stickﬁ x coating.

Afﬁ x the triangular abrasive STF-V93 to the tip

followed directly by a normal sanding strip STF-

93x178. In order to obtain maximum use of the

triangular abrasive it can be rotated at random

on the end of the sanding pad.

Please note

The STF-V93x266 sanding pad has been specially

developed for work in corners and on edges. Expe-

rience has shown that this leads to uneven stress

on the tip of the sanding pad. This inevitably leads

to the generation of more heat than when work-

ing on ﬂ at surfaces since the same force has to

be distributed over a smaller surface. You should

therefore work with reduced pressure, otherwise

the Stickﬁ x coating on the sanding pad and abra-

sive can become damaged.

7 Attaching sanding material

Always use original Festool sanding ma-

terials!

7.1 Stickﬁ x abrasives

Self-adhesive abrasives such as Stickﬁ x

sandpaper and sanding ﬂ eeces can be

attached to Stickﬁ x sanding shoes.

The abrasives (2.3) are simply pressed onto the

sanding shoe (2.4) and pulled off after use.

7.2 Abrasives to clamp

Festool offers perforated abrasives to

clamp.

Unperforated abrasives can be perforated with

the „Lochﬁ x“ (accessory).

Secure an abrasive sheet in place using the two

clamping devices (1.12). Press the levers to re-

lease the clamping devices.

Once clamped in position, make sure the

abrasive paper is taut and sits ﬂ at on the

sanding pad.

8 lnstructions on application

Never overload the tool by using too much pres-

sure! The best sanding results are achieved

when applying moderate pressure. The sanding

performance and quality depend mainly on the

choice of the right sanding material.

We recommend the following settings on the

rotary control (2.1) for electronic machines:

rotary control setting

- sanding work

5 - 6

- sanding with max. drive

- sanding old paint

- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces

4 - 5

- sanding of thinly applied primer

- sanding of wood with sanding vlies

- sanding edges on wooden parts

- smoothing primed wooden surfaces.

3 - 4

- sanding full wooden and veneer edges

- sanding in the grooves/rebates of windows and

doors

- interim paint sanding on edges

- pre-sanding natural wood windows with sanding

vlies

- smoothing wood surfaces with sanding felt prior

to staining

- rubbing down stained surfaces with sanding

vlies

- rubbing down or removing excess lime paste

with sanding vlies

2 - 3

- interim paint sanding on stained surfaces

- cleaning natural wood window grooves with

sanding felt

1 - 2

- sanding stained edges

- sanding thermoplastic synthetics

9 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

The cool air openings in the motor casing must

always be kept clean and unobstructed to ensure

air circulation.

All maintenance and repair work which requires

the motor casing to be opened may only be carried

out by an authorised service centre.

10 Accessories, tools

Use only original Festool accessories and Festool

consumable material intended for this machine

because these components are designed speciﬁ -

cally for the machine. Using accessories and con-

sumable material from other suppliers will most

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool rs 300 q Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info