Bedienungsanleitung Festool RTS 400 Q (Seite 9 von 46) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

498730

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Orbital sander

Technical data RTS 400 Q RTS 400 EQ

Power 200 W

Speed 14,000 rpm 5,000 - 14,000 rpm

Working strokes 28,000 rpm 10,000 - 28,000 rpm

Sanding stroke

2.0 mm

Sanding pad

80 x 130 mm

Weight

1.1 kg (excluding cable)

Degree of protection

/ II

2.2 Tool-speciﬁ c safety rules

- Always wear protective goggles because of pos-

sible dangers when sanding.

- The manufacturer’s handling and processing

instructions must be observed without fail if ex-

plosive or self-igniting dusts are likely to occur

during sanding.

- Harmful/toxic dusts can occur during your work

(e.g. lead-containing paint, some types of wood

and metal). Contact with these dusts, especially

inhaling them, can represent a hazard for operat-

ing personnel or persons in the vicinity. Comply

with the safety regulations that apply in your

country. Connect the electric power tool to a suit-

able extraction system. To protect your health,

wear a P2 protective mask.

2.3 Noise and vibration information

The typical values determined in accordance with

EN 60745 are:

Sound-pressure level 70 dB(A)

Sound-power level 81 dB(A)

Measuring uncertainty allowance K = 3 dB

Wear ear protection!

Overall vibration levels (vector sum for three

directions) measured in accordance with EN

60745:

Vibration emission level (3-axis) a

= 4.0 m/s

Uncertainty K = 2.0 m/s²

The speciﬁ ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise loads

during operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with

other insertion tools or if not maintained adequat-

ely. Take note of idling and downtimes of machine!

The speciﬁ ed illustrations can be found at the be-

ginning of the operating instructions.

Symbols

Warning of general danger

Wear ear protection!

Read the Operating Instructions/Notes!

1 Intended use

As speciﬁ ed, the machines are designed for sand-

ing wood, plastic, stone, composite materials,

paint/varnish, ﬁ ller and similar materials. Metal

and materials containing asbestos must not be

processed.

The machine is particularly suitable for processing

smaller surfaces and overhead work because of its

size, its weight and its output.

For reasons of electrical safety the machine must

not be damp nor operated in a humid environment.

The machine may only be used for dry sanding.

The user is liable for damage and injury

resulting from incorrect usage!

2 Safety instructions

2.1 General Safety Rules

WARNING! Read all safety warnings and

all instructions. Failure to follow the warn-

ings and instructions may result in electric shock,

ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool RTS 400 Q Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info