Bedienungsanleitung Festool SRM 312 LE-AS (Seite 9 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499198

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

4.1 Vacuuming dry materials

Before using the vacuum cleaner to

evacuate dry substances, a filter bag

must always be inserted in the

container. Then the evacuated material

can be disposed of easily.

A filter bag must be used without

exception when evacuating noxious

substances!

The filter element becomes damp after

evacuating liquids. A damp filter element suffers

more wear and tear if it is used for dry

materials. Accordingly, the filter element should

be dried or replaced with a dry one before dry

operation.

4.2 Vacuuming liquids

The filter bag has to be removed before

evacuating liquids.

We recommend use of a special wet filter.

Do not evacuate combustible liquids!

If foam or liquid escapes, stop work

immediately and empty the dirt container.

4.3 Volume flow monitoring

If the air speed in the suction hose drops below

20 m/s, an acoustic warning signal sounds for

safety reasons.

Possible causes and adjustments:

 Cause

- Adjustment

Suction force regulator (1.10) set to a too

low value

- Adjust suction force regulator to a higher

value

Rotary knob (1.3) not adjusted to the

connected hose diameter

- Adjust to correct hose diameter

 Suction hose blocked or twisted

- Remove blockage or twist

Filter bag full

- Change filter bag

Filter element dirty

- Change filter element

- Only when operating without a filter bag:

clean filter element

Electronic monitoring system malfunctioning

- Call Festool customer service for

adjustment

5 After finishing work

- Switch off the cleaner and pull the plug of the

mains lead out of the plug socket.

- Empty dirt tank.

- If noxious dusts have been extracted, the

vacuum cleaner and all accessories must be

completely cleaned (inside and outside) by

suction and wiping, before removal from the

contaminated area. Parts that cannot be

completely cleaned are to be packed for

transport in a plastic bag with an airtight seal.

The suction opening (1.7) must be sealed

with the blanking plug (1.6) for transport

purposes.

- Deposit the appliance in a dry room, safe from

unauthorised use.

6 Temperature control

Always remove the mains plug from

the socket before carrying out any

maintenance work!

Any maintenance and repair work

requiring an opening of the motor

housing may only be carried out by an

authorised customer service

workshop.

A safety test is to be carried out at least once

a year by the manufacturer or an instructed

person, e.g. for possible damage to the filter

and leaks in the appliance, and to ensure that

the control devices are functioning.

7 Accessories, filter

The accessory and filter order number can be

found in your Festool catalogue or on the

Internet under www.festool.com.

8 Warranty

Our equipment is under warranty for at least

12 months with regard to material or

production faults in accordance with national

legislation.

In the EU countries, the warranty period is 24

months (an invoice or delivery note is required

as proof of purchase).

Damage resulting from, in particular, normal

wear and tear, overloading, improper handling,

or caused by the user or other damage caused

by not following the operating instructions, or

any fault acknowledged at the time of

purchase, is not covered by the warranty.

Complaints will only be acknowledged if the

equipment has not been dismantled before

being sent back to the suppliers or to an

authorised Festool customer support work-

shop. Store the operating instructions, safety

notes, spare parts list and proof of purchase

in a safe place.

In addition, the manufacturers current

warranty conditions apply.

Note

We reserve the right to make changes to the

technical data contained in this information as

a result of ongoing research and development

work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool SRM 312 LE-AS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info