Bedienungsanleitung Festool SRM 45 E-LHS 225 PLANEX (Seite 14 von 102) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499181

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Save all warnings and instructions for future

reference.

- The machine should only be used by appointed

persons instructed in correct machine han-

dling.

- Use original Festool accessories only.

- Warning: the machine may contain hazardous

dust. Only authorised and qualiﬁ ed personnel

with suitable protective equipment may perform

maintenance work, including emptying the con-

tainer and changing the ﬁ lter. Do not operate the

machine without a fully ﬁ tted ﬁ lter system.

- The machine is not intended for use by persons

(including children) with limited physical, sensory

or mental ability or without sufﬁ cient experience

and/or knowledge, unless they are supervised by

a person responsible for their safety or have been

instructed on how to use the machine. Children

should always be supervised to ensure that they

do not play with the machine.

- Observe the safety requirements that apply for

the dust you intend to extract.

- Risk of explosion and ﬁ re hazard: do not extract

sparks or hot dust, ﬂ ammable or explosive dust

(e.g. magnesium, aluminium), ﬂ ammable or

explosive ﬂ uids (e.g. petrol, thinner), aggressive

ﬂ uids/solids (e.g. acid, leach, solvent). This mo-

bile dust extractor is suitable for extracting paint

dust. Operate the machine in a well-ventilated

room!

- Pull the plug from the socket when the machine

is not in use and prior to maintenance and clean-

ing work.

- Check the plug and the cable regularly and have

them replaced by an authorised after-sales serv-

ice workshop should either become damaged.

- Always replace the mains power cable with the

type speciﬁ ed in the manual.

- Do not damage the mains power cable (e.g. by

driving over, dragging, etc.). Do not pull the plug

from socket by the cable.

- Always use the machine socket for the purpose

speciﬁ ed in the manual.

- Clean the integral water level ﬂ oat regularly and

check for damage.

- Do not expose the machine to rain.

- Do not lift or transport the machine by the handle

using a crane or lifting gear.

- For reasons of safety, never operate the machine

from an unearthed socket.

6 Commissioning

WARNING

Risk of accident if the machine is operated using

unauthorised voltages or frequencies.

- The operating voltage speciﬁ ed on the mobile

dust extractor name plate must match the

voltage of the mains power!

- Make sure that the mobile dust extractor is

switched off when plugging in the mains ca-

ble.

6.1 Assembling the machine

The parts included in the scope of delivery are en-

closed inside the dust container [1-1] on delivery

and must be removed before initial use.

• Afﬁ x the accompanying sticker in your national

language over the text ﬁ eld on the warning sign

[1-3].

Inserting the ﬁ lter bag/disposal bag

• Remove the top section [Fig. 2].

• Insert the disposal bag [Fig. 3] or the ﬁ lter bag

[Fig. 4].

• Replace the top section and close the locking

clips.

Inserting the cable hook

• Slide the cable hook [1-7] for storing the mains

power cable into the holder [1-8] from above.

6.2 Preparing for use with the PLANEX

To use the mobile dust extractor in combination

with the PLANEX:

• Fit the tool holder as described in the there en-

closed installation instructions.

• You can store sandpaper, the brush segment and

the PLANEX on the tool holder storage area.

• Only use disposal bags when performing extrac-

tion work with the PLANEX.

6.3 Switching the machine on/off

 Make sure that the connected machine is

switched off before actuating the switch [1-4].

"0" switch position

Appliance socket [1-5] is disconnected from the

power, mobile dust extractor is switched off.

"MAN" switch position

Appliance socket is connected to the power, extrac-

tion motor starts.

"Auto" switch position

Appliance socket is connected to the power, extrac-

tion motor starts when the connected machine is

switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool SRM 45 E-LHS 225 PLANEX Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info