Bedienungsanleitung Festool T 12en3 (Seite 14 von 97) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

497588

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

T 12+3, T 15+3, T 18+3

* Speed specifications with fully charged battery pack.

** The maximum speed is reduced in the lower torque stages.

5 Safety instructions

5.1 General safety instructions

WARNING! Read all safety warn-

ings and all instructions.

Failure to

follow the warnings and instructions may re-

sult in electric shock, fire and/or serious in-

jury.

Save all warnings and instructions for

future reference.

The term "power tool" in the warnings refers

to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

5.2 Machine-related safety instruc-

tions

–

Hold power tool by insulated gripping

surfaces, when performing an opera-

tion where the cutting accessory may

contact hidden wiring or its own cord.

Cutting accessory contacting a "live" wire

may make exposed metal parts of the

power tool "live" and could give the opera-

tor an electric shock.

–

The charger and power tool are not in-

tended for use by persons (including

children) with limited physical, senso-

ry or mental ability or without suffi-

cient experience and/or knowledge,

unless they are supervised by a per-

son responsible for their safety or

have been instructed on how the

charger or power tool is to be

used.

Children should always be super-

vised to ensure that they do not play with

the charger or the power tools.

–

Switch of the power tool immediately

if the tool is blocked. Always be pre-

pared for high reaction torques that

can cause kickback.

The tool blocks if:

- the power tool is overloaded or - it be-

comes jammed in the workpiece being pro-

cessed.

–

Wait until the power tool stops com-

pletely until placing it down.

The tool

can become entangled and lead to a loss of

control of the power tool.

–

Avoid unintentional activation. Ensure

that the on/off switch is in switched-

off position before inserting a battery.

Carrying the power tool with your finger at

the on/off switch, or inserting the battery

when the power tool is switched on, can re-

sult in accidents.

– Take care when drilling into walls as there

is a danger of rupturing concealed gas/wa-

ter pipes or cutting through power cables.

– Do not open the battery pack or the charg-

er. Even after disconnection from the

mains, there is still a high capacitor voltage

inside the charger.

– Make sure that metal objects (such as met-

al chips) or fluids do not collect in the bat-

tery pack retaining slots or enter the

Charger TRC 3

Mains voltage (input) 220 - 240 V ~

Mains frequency 50/60 Hz

Charging voltage (output) 7.2 - 18 V=

Rapid charging max. 3 A

Conservation charging current, pulsating (only NiCd, NiHM) approx. 0.06 A

Charging times for LiIon 1.5 Ah/ 3.0 Ah, 80 % approx. 25/ 55 min

LiIon 1.5 Ah/ 3.0 Ah, 100 % approx. 35/ 70 min

Permitted charging temperature range -5 °C to +45 °C

Temperature monitoring via NTC resistor

Battery Pack BPC 12 Li BPC 15 Li BPC 18 Li

Voltage 10,8 V 14,4 V 18 V

Capacity 3,0 Ah 3,0 Ah 3,0 Ah

Weight 0,49 kg 0,58 kg 0,68 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool T 12en3 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info