Bedienungsanleitung Festool T 12en3 (Seite 18 von 97) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

497588

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

T 12+3, T 15+3, T 18+3

ject to national and international dangerous

goods regulations, neither as an individual

component nor as a fitted machine compo-

nent. However, dangerous goods regulations

may apply when several battery packs are

transported, in which case you may have to

fulfil special conditions. Refer to ADR special

regulation 230 for more information relevant

for the EU.

14 Warranty

We offer a warranty for material and produc-

tion defects for all our tools in accordance

with the locally applicable legal provisions,

but for a minimum of 12 months. Within the

EU member states, the warranty period is 24

months (verification through invoice or deliv-

ery note). Damage caused by the operator,

natural wear, overloading, incorrect handling

or through the use of the equipment not

specified in the operating manual, or damage

which was known at the time of purchase, is

not covered by the warranty. Furthermore,

damage caused by the use of non-original

accessories and consumable materials (e.g.

sanding pads) is also excluded.

Complaints can only be accepted if the tool is

returned while still assembled to the supplier

or an authorised Festool Customer Service

workshop. Keep the operating manual, safe-

ty instructions, spare parts list and purchase

receipt in a safe place. Otherwise the current

warranty conditions of the manufacturer

shall apply.

Note

Due to continuous research and develop-

ment work, we reserve the right to make

changes to the technical content of this doc-

umentation.

15 EU Declaration of Conformi-

We declare under sole responsibility that this

product complies with the following direc-

tives and standards:

2006/42/EC, 2004/108/EC, 2011/65/EU

(from 03.01.2013), EN 60745-1, EN 60745-

2-1, EN 60745-2-2, EN 55014-1, EN 55014-

We declare under sole responsibility that this

product complies with the following direc-

tives and standards:

2004/108/EC, 2006/95/EC, 2011/65/EU

(from 03.01.2013), EN 60335-1, EN EN

60335-2-29, EN 61000-3-2, EN 61000-3-3,

EN 61204-3.

Festool GmbH

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Johannes Steimel

Head of Research, Development and Techni-

cal Documentation

19.01.2011

REACh for Festool products, its accesso-

ries and consumable materials:

REACh is a European Chemical Directive that

came into effect in 2007. As "downstream

users" and product manufacturers, we are

aware of our duty to provide our customers

with information. We have set up the follow-

ing website to keep you updated with all the

latest news and provide you with information

on all the materials used in our existing prod-

ucts:

www.festool.com/reach

Cordless drill Serial no.

T 12+3 497835

T 15+3 497836

Year of CE mark: 2007

T 18+3 497933

Year of CE mark: 2010

Charger Serial no.

TRC 3 494635, 494636, 494637

Year of CE mark: 2007

Cordless drill Serial no.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool T 12en3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info