778606
16
Zoom out
Zoom in
Vorherige Seite
1/93
Nächste Seite
Jigsaws PS 300 EQ, PSB 300 EQ
Max. inclined position 45° to both sides
Max. cutting depth (depending on saw blade) Wood 120 mm
Aluminium 20 mm
Steel 10 mm
Weight according to EPTA-Procedure 01:2014 2.4 kg
5 Functional description
[1-1; 2-2] On/Off switch-/Ausschalter
[1-2; 2-3] Gripping surface
[1-3; 2-4] Stroke speed control
[1-4] Mains power cable
[1-5] Allen key
[1-6] Pendulum stroke switch
[2-1] Locking button (only PS 300 EQ)
[2-5] Extraction adapter
[2-6] Lever release extraction adapter
[2-7] Hook engage extraction adapter
[2-8] Recess for hook on extraction
adapter
[2-9] Chip ejection
[2-10] Chip guard
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
WARNING
Unauthorised voltage or frequency.
Risk of accidents
The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and detaching the mains power ca
ble [1-4] see fig. [2a].
PS 300 EQ
The tool has a slide switch [1-1] to switch it on
and off (I = ON; 0 = OFF).
PSB 300 EQ
The tool has a pressure switch [2-2] to switch it
on and off.
The locking button [2-1] can be engaged to op
erate in continuous mode. Press the button
again to release the lock.
7 Settings
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1 Changing tools
CAUTION
Risk of injury from hot and sharp insertion
tool
Do not use any blunt or faulty insertion
tools.
Wear protective gloves when handling an
insertion tool.
Open the clamping lever [3-4] as far as the
stop.
Remove the existing saw blade.
Insert a new saw blade into the saw blade
mount [3-1] as far as it will go.
English
16
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool Trion PS 300 EQ - 2021 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info