Bedienungsanleitung Festool TS 55 FEQ (Seite 22 von 150) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

778504

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

aged components repaired before using the

power tool.

–Use appropriate detection devices to look

for any hidden supply lines or consult your

local utility company. If the insertion tool

makes contact with live cables, it can result

in fire and electric shock. Damage to a gas

pipe can lead to an explosion. Penetration

of a water pipe can result in damage to

property.

2.5 Sawing aluminium

When sawing aluminium, the following meas

ures must be taken for safety reasons:

– Wear protective goggles.

– Regularly clean dust deposits from the mo

tor housing on the power tool.

– Use an aluminium saw blade.

– Close the viewing window/chip guard.

– Install an upstream residual-current circuit

breaker (RCD, PRCD).

– When sawing panels, they must be lubrica

ted with petroleum, but thin-walled profiles

(up to 3 mm) can be sawed without lubrica

tion.

2.6 Emission levels

The levels determined in accordance

with EN 62841 are typically:

Sound pressure level LPA = 90 dB(A)

Sound power level LWA = 101 dB(A)

Uncertainty K = 3 dB

CAUTION

Noise generated when working

Risk of damage to hearing

► Use ear protection.

Vibration emission level ah (vector sum for

three directions) and uncertainty K measured in

accordance with EN 62841:

Sawing wood ah < 2.5 m/s2

K = 1.5 m/s2

Sawing metal ah < 2.5 m/s2

K = 1.5 m/s2

The specified emission levels (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise

load during operation.

– They represent the primary applications of

the power tool.

CAUTION

The emission values may deviate from the

specified values. This is dependent on how

the tool is used and the type of workpiece

being machined.

► The actual load during the entire operating

cycle must be evaluated.

► Depending on the actual load, suitable pro

tective measures must be defined in order

to protect the operator.

3 Intended use

Circular saws are designed for sawing wood,

materials similar to wood, gypsum and cement-

bonded fibre materials and plastics. When fitted

with the special saw blades for aluminium that

are offered by Festool, these machines can also

be used for sawing aluminium.

Materials containing asbestos must NOT be

processed.

Do not use cutting or abrasive wheels.

This power tool may only be used by experts or

instructed persons.

The user is liable for improper or non-in

tended use.

3.1 Saw blades

Only use saw blades with the following dimen

sions:

– Saw blades according to EN 847-1

– Saw blade diameter 160 mm

– Cutting width 1.8 mm

– Locating bore 20 mm

– Standard blade thickness 1.1 – 1.4 mm

– Suitable for speeds of up to 9500 rpm

Festool saw blades comply with EN 847-1.

Only saw materials for which the saw blade in

question has been designed.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool TS 55 FEQ Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info