Bedienungsanleitung Fiio X5 (Seite 9 von 19) (Englisch)

645689

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

4. Browse files

Turn the scroll wheel to select “Browse files” and press OK to browse the music files

contained in the micro SD card. (“TF card not found” would pop up if there is no micro SD

card inserted in the slot selected) or any external storage connected to the X5 via USB OTG

connection (“OTG”). Turn the scroll wheel to select between items, press OK on a song to

play it or press OK on a folder to enter the folder.

5. Play settings

Turn the scroll wheel to choose between menu items and use the Previous, Next or OK key

to choose between options on the chosen menu item. On items with a submenu (indicated

by“>”), press OK to enter the submenu.

1） Play mode

Four play modes are available: sequential (plays to the end of the list and stops), loop all, loop

single song and shuffle.

2）Resume mode

Controls where the X5 starts playing from when it is switched off and switched back on.

Off: no memory of the last song played when X5 is switched off.

Song: resumes playback from the start of the last song played when the X5 was switched off.

Position: resumes playback from the last position on the timeline of the last song played when

the X5 was switched off.

3） Gapless playback

Turn this on to play e.g. a live performance divided into several tracks without breaks in

between tracks.

4）Max volume

To protect your headphones and your hearing, the max volume can be limited to a value

between 30 and 120 (unlimited maximum is 120). Press OK to show the adjustment submenu,

turn the scroll wheel to adjust the limit value and press OK to store the change.

5） Fixed volume setting

Memory: recalls the volume set when the player was powered off.

Custom: always powers on the player at the volume defined in “Fixed volume setting”.

Fixed volume setting: adjustable only when “Power on volume” is set to “Custom”. Press

OK to show the adjustment submenu, turn the scroll wheel to change the power-on volume

setting and press OK again to store the change.

6） Gain

There are Low and High gain settings available. Low gain may be selected to extend battery

life under usual operating conditions; High gain may be selected to drive low-efficiency /

high-impedance headphones more fully to obtain further musical enjoyment.

7） Equalizer

There are several preset equalizer settings as well as a custom setting available. All presets as

well as the custom setting are editable. Press the previous and next keys to switch between

presets (Off, Rock, Classical, Jazz, Pop, Dance, Vocal, Blues, Metal and Custom). Press OK to

enter editing mode (arrow will appear above one of the EQ bands), turn the scroll wheel to

choose between different frequency bands, press OK to select a frequency band for editing

and turn the scroll wheel to adjust the frequency band up or down, and then press OK to

store the change and use the scroll wheel to choose another frequency band for editing.

Press the back button to store changes / exit to EQ band selection / preset selection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fiio X5 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info