456443
4
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
40069 Zola Predosa (BO) - ITALY
info@finicompressors.it
- GB -
Dear Customer,
thank you for choosing our product. In order to get the best performances in the use of this product, please
read carefully this manual.
To avoid incorrect operation of the equipment and possible physical risk to the operator, please read and
strictly follow the instructions contained in this manual. Note, these instructions are in addition to the safety
rules that apply in the country where the dryer is installed.
Before packing for shipment each ARTIC 134/EVO series refrigerated air dryer is subjected to a rigorous
test to ensure the absence of any manufacturing faults and to demonstrate that the device can perform all
the functions for which it has been designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for
use without any further adjustment.
The operation is fully automatic, and the maintenance is limited to few controls and some cleaning
operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be
intended as inherent part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
IDENTIFICATION PLATE
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temperature
Ambient Temperature
Refrigerant
Refrigerant Design Pres. HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
The product identification plate,
on the back of the dryer, shows
all the primary data of the
machine.
These data must always be
referred to the manufacturer or
to the dealer when information
or spares are needed, even
during the warranty period.
The removal or the alteration of
the identification plate will void
the warranty rights.
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant
Refrig. Design Pres.
HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
Nl/min
barg
°C
°C
type/kg
barg
ph/V/Hz
W/A
A
www.finicompressors.com
BOLOGNA - ITALY
40069 - ZOLA PREDOSA
FINI S.p.A.
Fini
COMPRESSORS
WARRANTY CONDITIONS
For 12 months from the installation date, the warranty covers eventual faulty parts, which will be repaired or
replaced free of charge, except the travel, hotel and restaurant expenses of our engineer.
The warranty doesn’t cover any responsibility for direct or indirect damages to persons, animals or
equipment caused by improper usage or maintenance, and it’s limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and
maintenance instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer.
To require repairs during the warranty period, the data reported on the identification plate must be notified.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Finicompressors Artic 134-EVO luchtdroger wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info