Bedienungsanleitung Finlux 22F7030 (Seite 27 von 40) (Englisch)

500536

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

- 26 -

Operating Settings Menu Items

Press “• ” or “ ” button to highlight a menu item.

Press • OK button to select an item.

Press • MENU button to exit.

Settings Menu Items

Conditional Access: Controls conditional access

modules when available.

Language: Congures language settings.

Parental: Congures parental settings.

Timers: Sets timers for selected programmes.

Date/Time: Sets date and time.

Sources: Enables or disables selected source

options.

Other Settings: Displays other setting options of

the TV set.

Using a Conditional Access

Module (not included)

IMPORTANT: Insert or remove the CI module only

when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional •

access module (CAM) may be necessary. This module

must be inserted in the CI slot of your TV.

Obtain the Conditional Access Module (CAM) and •

the viewing card by subscribing to a pay channel

company, then insert those to the TV using the

following procedure.

Insert the CAM and then the viewing card to the •

slot that is located in the terminal cover at the rear

side of the TV.

The CAM should be correctly inserted, it is •

impossible to insert fully if reversed. The CAM or

the TV terminal may be damaged if the CAM is

forcefully inserted.

Connect the TV to the mains supply, switch on

and then wait for few moments until the card is

activated.

When no module is inserted, “• No Common

Interface module detected” message appears on

the screen.

Refer to the module instruction manual for details •

of the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on

the service provider.

Press MENU button and select the icon by using

“ ” or “ ” button. Press OK button to view Settings

menu. Use “ ” or “ ” button to highlight Conditional

Access and press OK to view menu items.

Conguring Language

Preferences

You can operate the TV’s language settings using

this menu.

Press MENU button and select the Settings icon by

using “ ” or “ ” button. Press OK button to view

Settings menu. Use “ ” or “ ” button to highlight

Language and press OK to continue:

Use “ ” or “ ” button to set an item. Settings are

stored automatically.

Menu: displays the system language.

Preferred

These settings will be used if available. Otherwise the

current settings will be used.

Audio• : Sets the preferred audio language.

Subtitle• : Sets the subtitle language. Selected

language will be seen in subtitles.

Teletext• : Sets teletext language.

Guide• : Sets the preferred Guide language.

Current (*)

(*) These settings can be changed if only the

broadcaster supports. Otherwise, settings will not be

available to be changed.

Audio• : Changes the audio language for the current

channel.

Subtitle• : Sets the subtitle language for the current

channel.

Note: If the Country option is set to Denmark, Sweden,

Norway or Finland, the Language Settings menu will

function as described below:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 22F7030 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info