Bedienungsanleitung Finlux 22FLD842 (Seite 43 von 64) (Deutsch, Englisch)

584103

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English - 42 -

Inserting Batteries into the

Remote Control

• Remove the battery cover located on the back of

the remote control by gently pulling backwards from

the indicated part.

• Insert two AAA/R3 or equivalent type batteries

inside.Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

Note : Remove the battery from remote control when it is not

to be used for a long period. Otherwise it can be damaged

due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC 50

Hz.

• Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the “

” button, P+ / P- or a numeric button

on the remote control.

• Press the -P/CH or P/CH+ button on the TV. The TV

will then switch on.

Note : If you switch on your TV via PROGRAMME UP/DOWN

buttons on the remote control or on the TV set, the programme

that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or

press the STANDBY switch, so the TV will switch

to standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such

as Standby Search, Over Air Download or Timer is

active.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources.

• Press “ ” button on your remote control for

directly changing sources.

• Select “Source” option from the main menu

by using “

” or “ ” button. Use then “ ” or

“ ” button to highlight an input and press “ ” button

to select.

Note : With the “ ” or “ ” buttons you can set Off or On.

When Off is selected; this source does not appear in the OSD

when you press the

“ ” button of the remote control.

(except for the TV source).

Note : YPbPr mode can be used only when you connect a

device that has a YPbPr output through the PC-VGA input with

YPbPr to PC cable (YPbPr cable is not supplied).

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons of the TV

Main menu OSD cannot be displayed via control

buttons. “+/-” buttons will function as volume up/down

as default. Even if you set other functions for these

buttons, “+/-” buttons will perform as default after a

short while.

Volume Setting

• Press “+/-” buttons to increase or decrease volume,

so a volume level scale (slider) will be displayed

on the screen.

Programme Selection

• Press P/V/AV button once and then use “+/-” buttons

to select the next or previous programme.

AV Mode

• Hold the “P/V/AV ” button, source OSD will be

displayed.Use “+/-” buttons to select the desired

source.

Operation with the Remote Control

• The remote control of your TV is designed to control

all the functions of the model you selected. The

A02_MB46_[GB]_1205UK_IDTV_NICKEL15_22841W_10069458_50170499.indd 42A02_MB46_[GB]_1205UK_IDTV_NICKEL15_22841W_10069458_50170499.indd 42 04.08.2010 17:07:5404.08.2010 17:07:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 22FLD842 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux 22FLD842

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info