Bedienungsanleitung Finlux 22FLD842 (Seite 51 von 64) (Deutsch, Englisch)

584103

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English - 50 -

(*) For Denmark, Sweden, Norway or Finland.

Auto Channel Scan (Retune)

Auto Channel Scan (Retune) is started by pressing

“OK” button while Auto Channel Scan (Retune) item

is highlighted.

The following message appears on the screen:

Highlight Yes or No by using “ ” or “ ” buttons and

press “OK” button to conﬁ rm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a

message asking whether to search for analogue

channels appears on the screen:

Press the “OK” button to search for analogue

channels. The following menu appears on the screen

for analogue channel search:

Select your Country , Language and Text language

by using “ ” or “ ” and “ ” or “ ” buttons. Press

“OK” or RED button to continue. To cancel, press

BLUE button. The following menu will be displayed

during the automatic tuning:

After APS is ﬁ nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Channel Search

In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched

for the channels. For each valid channel number, signal

level and signal quality are shown on the screen.

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “ ” or

“ ” button to select Clear Service List and then press

OK. The following OSD message will be displayed

on the screen:

Highlight NO and press OK to cancel. Select Yes by

pressing “ ” or “ ” button and press OK to delete all

of the channels.

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight “First Time

Installation” menu item and press “OK” button, then

you will be asked whether or not to delete the settings.

Selecting “Yes” by pressing “OK” button while “Yes” is

highlighted will delete the existing channel table.

Then you will be asked to conﬁ rm for deleting all

channels and settings:

By selecting Yes and pressing the “OK” button, the

existing channel table will be deleted. After factory

settings are loaded, “First Time Installation” menu

will be displayed.

The menu which is displayed for language selection

appears on the screen at ﬁ rst. By using “

” or “ ”

A02_MB46_[GB]_1205UK_IDTV_NICKEL15_22841W_10069458_50170499.indd 50A02_MB46_[GB]_1205UK_IDTV_NICKEL15_22841W_10069458_50170499.indd 50 04.08.2010 17:07:5904.08.2010 17:07:59

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 22FLD842 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux 22FLD842

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info