Bedienungsanleitung Finlux 32F6030-T (Seite 19 von 45) (Englisch)

500510

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

English - 18 -

Customer Helpline 0845 459 5282

Record / Delete Record Timer

IMPORTANT: To record a programme, you should

rst connect a USB disk to your TV while the TV is

switched off. You should then switch on the TV to

enable the recording feature. Otherwise, the recording

feature will not be available.

After you have selected a programme in EPG menu, •

press the OK button and and Options screen will

be displayed. Select “Record” option and press the

OK button. After this operation, a recording becomes

set to the selected programme.

To cancel an already set recording, highlight that •

programme and press the OK button and select

the option “Delete Rec. Timer”. The recording will

be cancelled.

Note: You cannot switch to any other channel or

source while there is an active recording on the

current channel.

Set Timer / Delete Timer

After you have selected a programme in EPG menu,

press the OK button and and Options screen will

be displayed. Select “Set Timer on Event” option

and press OK button. You can set a timer for future

programmes.

To cancel an already set reminder, highlight that

programme and press the OK button. Then select

“Delete Timer” option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or

more individual events at the same time interval.

Installation

HINT: Auto tuning feature will help you to retune the TV

set in order to store new services or stations.

Press “MENU” button on the remote control and

select Installation by using “ ” or “ ” button. Press

OK button and the following menu screen will be

displayed.

Select Automatic Channel Scan (Retune) by using “

”/“ ” button and press OK button. Automatic Channel

Scan (Retune) options will be displayed. You can

select options by using “ ”/“ ” and OK buttons.

Auto Channel Scan Menu Operation

Digital Aerial: Searches and stores aerial DVB

stations.

Analogue: Searches and stores analogue stations.

Digital & Analogue: Searches and stores both

analogue and aerial DVB stations.

After auto channel scan type is set and selected •

and conrmed, installation process will start and

progress bar will move along. Press “MENU” button

to cancel process. In such a case, located channels

are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast

entry.

Select Manual Channel Scan from the Installation

menu by using “ ”/“ ” and OK buttons. Manual Scan

options screen will be displayed.

Select the desired • Search Type using “ ” or “

” button. Manual search options will change

accordingly. Use “ ”/“ ” button to highlight an item

and then press “ ” or “ ” button to set an option.

You can press “MENU” button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex

or frequency are entered manually and only that

multiplex or frequency are searched for the channels.

After selecting search type as Digital, you can enter

the multiplex or frequency number using the numeric

buttons and press OK button to search.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 32F6030-T Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info