Bedienungsanleitung Finlux 32H6050 (Seite 25 von 36) (Englisch)

500514

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- 24 -

In the equalizer menu, the preset can be changed

to Music, Movie, Speech, Flat, Classic and User.

Press the MENU button to return to the previous

menu.

Note: Equalizer menu settings can be changed

manually only when the Equalizer Mode is in User.

Balance: This setting is used for emphasizing left or

right speaker balance.

Headphone: Sets headphone volume.

Sound Mode: You can select Mono, Stereo, Dual I

or Dual II mode, only if the selected channel supports

that mode.

AVL: Automatic Volume Limiting (AVL) function sets the

sound to obtain xed output level between programmes

(For instance, volume level of advertisements tend to

be louder than programmes).

Dynamic Bass: Dynamic Bass is used to increase

bass effect of the TV set.

Digital Out: Sets digital out audio type.

Conguring Your TV’s Settings

Detailed settings can be configured to suit your

personal preferences.

Press MENU button and select Settings icon by using

“ ” or “ ” button. Press OK button to view Settings

menu.

Operating Settings Menu Items

Press “• ” or “ ” button to highlight a menu item.

Press • OK button to select an item.

Press • MENU button to exit.

Settings Menu Items

Conditional Access: Controls conditional access

modules when available.

Language: Congures language settings.

Parental: Congures parental settings.

Timers: Sets timers for selected programmes.

Date/Time: Sets date and time.

Sources: Enables or disables selected source

options.

Other Settings: Displays other setting options of

the TV set.

Using a Conditional Access

Module (not included)

IMPORTANT: Insert or remove the CI module only

when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional •

access module (CAM) may be necessary. This module

must be inserted in the CI slot of your TV.

Obtain the Conditional Access Module (CAM) and •

the viewing card by subscribing to a pay channel

company, then insert those to the TV using the

following procedure.

Insert the CAM and then the viewing card to the •

slot that is located in the terminal cover at the rear

side of the TV.

The CAM should be correctly inserted, it is •

impossible to insert fully if reversed. The CAM or

the TV terminal may be damaged if the CAM is

forcefully inserted.

Connect the TV to the mains supply, switch on

and then wait for few moments until the card is

activated.

When no module is inserted, “• No Common

Interface module detected” message appears on

the screen.

Refer to the module instruction manual for details •

of the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on

the service provider.

Press MENU button and select the icon by using

“ ” or “ ” button. Press OK button to view Settings

menu. Use “ ” or “ ” button to highlight Conditional

Access and press OK to view menu items.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 32H6050 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info