Bedienungsanleitung Finlux 40F8030-T (Seite 34 von 49) (Englisch)

500520

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

English - 33 -

Date, Time, Time Settings Mode and Time Zone

Setting will be available.

Use “ ” or “ ” buttons to highlight the Time Settings

Mode. Time Settings Mode is set using “ ” or “ ”

buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Date/Time and Time Zone

options will not be available to be set. If MANUAL

option is selected as the Time Zone can be altered:

• By pressing “ ” or “ ” buttons select Time Zone.

Use “ ” or “ ” buttons to change the Time Zone

between GMT-12 or GMT+12. Date/Time on the top

of the menu list will then change according to the

selected Time Zone.

Changes are automatically stored. Press “• MENU”

to exit.

Conguring Source Settings

You can enable or disable selected source options.

The TV will not switch to the disabled source options

when “SOURCE” button is pressed.

Select • Sources in the Settings menu and press

OK button.

Press“• ” or “ ” buttons to select a source.

Use “• ” or “ ” button to enable or disable the

selected source. Changes are automatically

stored.

Conguring IP Settings

On IP Settings window you can set IP address of

the TV set, which connects the TV to the Internet. IP

address can be either static or dynamic. Static means

that the address is given by service supervisor and

that you know. Also subnet mask and DNS Server’s

IP addresses should be set correctly.

If the IP address is not known or if a specic IP is

not used, you can press Blue (Dynamic) button.

With this selection a new IP address is taken from

service supervisor and addresses are displayed on

this menu. IP address setting elds can be edited if

Dynamic is selected, otherwise it is not available if

Static is selected. This menu is functional if an Internet

connection is present and if the ethernet cable is

plugged. If a connection problem occurs or the TV

does not connect to the Internet, menu screen will be

displayed as below and link status shown as Bad.

Wi-Fi Settings (Optional)

Wi-Fi feature can be used for a wireless network

connection. The feature is used for infrastructure

purposes only, such as connecting to the web. Press

BLUE button to congure IP settings when Wi-Fi menu

is displayed on the screen. Refer to IP Setting section

for more information about ip settings.To enable Wi-

Fi feature, pro les should be con gured properly.

Please plug in the Wi-Fi dongle to one of the USB

ports. Select information tab from Wi-Fi settings menu.

Device status should be set as enabled by pressing

the OK button. Wait until the IP the address is shown

on the secreen. This means that the connection

is now established. To disconnect from a wireless

network, you should highlight connection status and

press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 40F8030-T Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info