Bedienungsanleitung Finlux 42F701 (Seite 18 von 41) (Englisch)

500523

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English - 17 -

Digital Cable Manual Search

In cable manual scan, you can enter frequency,

modulation, symbol rate and network channel scan

options. After selecting search type as Digital Cable,

you can set the desired options and press OK button

to search.

Analogue Manual Search

After selecting search type as analogue, you can use

“ ”/“ ” button to highlight an item and then press “

” or “ ” button to set an option.

Enter the channel number or frequency using the

numeric buttons. You can then press OK button

to search. When the channel is located, any new

channels that are not on the list will be stored.

Analogue Fine Tune

Select • Analogue Fine Tune from the Installation

menu by using “ ” or “ ” and OK buttons. The

analogue ﬁ ne tune screen will be displayed. The

analogue Fine Tune feature will not be available if

there are no analogue channels, digital channels

and external sources stored.

Press • OK button to proceed. Use “

” or “ ” button

to set Fine Tune. When ﬁ nished, press OK button

again.

Network Channel Scan

Select Network Channel Scan from the installation

menu by using “ ” or “ ” and OK buttons. Network

Channel Scan selection screen will be displayed.

Select Digital Aerial or Digital Cable and press

OK button to continue. The following message will

be asked. Select Yes to continue or select No to

cancel.

If you start Digital Aerial scan process, automatic

scanning will start. You can press “MENU” button

to cancel.

If you start Digital Cable scan process, the following

screen will be displayed.

You can select frequency ranges from this screen. For

highlighting lines you see, use “ ” or “ ” button. You

can enter the frequency range manually by using the

numeric buttons on the remote control. Set Start and

Stop Frequency as desired by using numeric buttons

on the remote control. After this operation, you can set

Search Step as 8000 KHz or 1000 KHz. If you select

1000 KHz, the Tv will perform search process in a

detailed way. Searching duration will thus increase

accordingly. When ﬁ nished, press OK button to start

automatic search. Automatic searching screen will be

displayed during the process.

Note: If you select an extended gap between Start

and Stop frequency rate, automatic search duration

will take a longer time.

Analog Fine Tune

Select • Analog Fine Tune from the Installation menu

by using “ ” or “ ” and OK buttons. Analog ﬁ ne tune

screen will be displayed. Analog Fine Tune feature

will not be available if there are no analog channels,

digital channels and external sources stored.

Press • OK button to proceed. Use “

” or “ ” button

to set Fine Tune. When ﬁ nished, press OK button

again.

Clear Service List (*)

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “

” or

“ ” button to select Clear Service List and then press

OK. The following OSD message will be displayed

on the screen:

01_MB69_[GB]_DVB-TC_PVR_GOLD17_5103UK_42947W_10077158_50209400.indd 1701_MB69_[GB]_DVB-TC_PVR_GOLD17_5103UK_42947W_10077158_50209400.indd 17 29.12.2011 15:39:2529.12.2011 15:39:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 42F701 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info