Bedienungsanleitung Finlux 46S8030 (Seite 38 von 53) (Englisch)

500528

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

English - 37 -

Customer Helpline 0845 459 5282

Wi-Fi Settings (Optional)

Wi-Fi feature can be used for a wireless network

connection (optional). The feature is used for

infrastructure purposes only, such as connecting to

the web, hbb sites and connecting with DLNA servers

(optional). Select Wireless Device option to switch to

Wireless Settings from Network Settings window.

Press GREEN button to switch to advanced mode

and then press OK button to edit settings.

To enable Wi-Fi feature, proﬁ les should be conﬁ gured

properly. Please plug in the Wi-Fi dongle to one of the

USB ports (IMPORTANT: “Veezy 100” USB dongle is

required to use wireless network feature. To use your

TV with your wireless network, you need a “Veezy

100” Wireless USB dongle.).

Press YELLOW button to scan wireless network

from network settings menu. Afterwards available

network list will be displayed. Please select your

desired network from the list. If the selected network

is protected with a password, please enter the correct

key by using the virtual keyboard. You can use this

keyboard via navigation buttons (Left/Right/Up/Down)

and OK button on the remote control. Wait until the

IP the address is shown on the screen.

This means that the connection is now established.

To disconnect from a wireless network, you should

highlight Conﬁ guration Status and press OK.

You can navigate between menu tabs by pressing left/

right buttons. The help bar on the bottom of the dialog

shows features that you may use. Press BLUE button

to check your internet connection speed.

You can check the signal strenght by using the network

settings menu for the wireless device mode.

Information

Configuration Status: Displays wi-fi status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks’ name will be

displayed.

Delete Saved Wiﬁ Proﬁ les

Saved proﬁ les will be deleted if you press red button

while wireless device selection osd is on the screen.

Connecting to your Cell Phone via WiFi

(Optional)

If your cell phone has WiFi feature, you can connect •

your cell phone to your TV by using WiFi connection

via a router, in order to play content from your phone.

For this, your cell phone must have an appropriate

sharing software.

Connect to your router following the steps stated •

above in the Wireless Connection section.

Afterwards, engage your cell phone with the router •

and then activate sharing software on your cell

phone. Then, select ﬁ les that you would like to share

with your TV.

If the connection is established correctly, you should •

now access the shared ﬁ les of your cell phone via

the Media Browser of your TV.

Enter Media Browser menu and playback device •

selection OSD will be displayed. Select your cell

phone’s ident and press OK to continue.

Note: This feature may not be supported by some

cell phones.

01_[GB]_MB70_5112UK_IDTV_T_DLNA_MMH_IPLAYER_100Hz_46965LED_GOLD11_10077106_50213111.indd 37 19.01.2012 11:04:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 46S8030 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info