Bedienungsanleitung Finlux 55UT3E242S-T (Seite 22 von 31) (Englisch)

584095

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English - 20 -

DLNA

DLNA support is only available in the Media Browser

folder mode. To enable folder mode, go to the Settings

tab in the main media browser screen and press OK. In

the settings options, highlight View Style and change to

Folder using the Left or Right buttons. Select the desired

media type and press OK.

If sharing congurations are set properly, an OSD

message will be displayed after selecting the desired

media type. Select OK to display the selected network

or USB memory content. If you want to refresh the

device list, press the GREEN button. You can press

MENU to exit.

If available networks are found, they will be listed on

this screen. Select media server or network that you

want to connect to using the “

” or “ ” buttons and

press OK.

If you select the media type as Video and choose a

device from the selection menu, a new menu screen

will appear on the screen

Select Videos from this screen to list all the available

video les from the selected network.

To play other media types from this screen, you must

go back to main Media Browser screen and select the

media type as desired and then perform the network

selection again. Refer to the Media Browser USB

Playback section for further information on le playback.

Subtitle les do not work if you watch videos from your

network through DLNA.

You can connect only one television with DLNA to

the same network. If a problem occurs with the DLNA

network, please switch your television off at the wall

socket and back on again. Trick mode and jump are

not supported with the DLNA function.

Note: There may be some PC’s which may not be able

to utilize the DLNA function due to administrator and

security settings (such as business PC’s).

For best home network streaming with this TV, the

supplied Nero software should be installed.

Internet Portal

Ensure the TV is connected to a Wired/Wireless

Internet connection. After the connection is

established, you can select or view portal options.

Note: A Broadband internet connection is required

for high quality viewing. Ensure that the internet

connection is made properly. You must set the

Country and Language data correctly in the First

Time Installation for the proper operation of the

internet portal.

Press “

” button on your remote control and the

portal application options will be displayed in a

manner similar to the template below.

Note on PIP Window

If you switch to portal mode while watching TV

channels, current programme will be displayed on

the PIP window. You can change channels using

P+/P- buttons.

Current HDMI content will be displayed on the PIP

window, if you switch to portal mode while watching

HDMI source.

Use the “

” or “ ”, “ ” or “ ” to navigate between

the items on Portal screen. Press the OK button to

conrm your selection. Press the BACK button to go

to the previous screen.

Press the EXIT button to quit the Internet portal mode.

Note: Possible application dependent problems may

be caused by the content service provider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 55UT3E242S-T Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info