Bedienungsanleitung Finlux 65F8200-T (Seite 19 von 51) (Englisch)

584094

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

English - 18 -

/ : Page left / Page right.

Programme Options

In EPG menu, press the OK button to enter the “Event

Options” menu.

Select Channel

In EPG menu, using this option, you can switch to the

selected channel.

Record / Delete Record Timer

IMPORTANT: To record a programme, you should

rst connect a USB disk to your TV while the TV is

switched off. You should then switch on the TV to

enable recording feature. Otherwise, recording feature

will not be available.

After you have selected a programme in EPG menu, •

press the OK button and and Options screen will

be displayed. Select “Record” option and press the

OK button. After this operation, a recording becomes

set to the selected programme.

To cancel an already set recording, highlight that •

programme and press the OK button and select

the option “Delete Rec. Timer”. The recording will

be cancelled.

Note: You cannot switch to any other channel or

source while there is an active recording on the

current channel.

Set Timer / Delete Timer

After you have selected a programme in EPG menu,

press the OK button and and Options screen will

be displayed. Select “Set Timer on Event” option

and press OK button. You can set a timer for future

programmes.

To cancel an already set reminder, highlight that

programme and press the OK button. Then select

“Delete Timer” option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or

more individual events at the same time interval.

First Time Installation

IMPORTANT: Ensure that the aerial or cable is

connected and a Common Interface module is not

inserted before switching on the TV for the rst

time installation.

Do not insert a common interface module during the

search process.

When the TV is operated for the rst time, installation •

wizard will guide you through the process. First,

language selection screen will be displayed:

Use “• ” or “ ” buttons to select your language

and press OK button to set selected language and

continue.

After selecting the language, “• Welcome!” screen will

be displayed, requiring you to set Country, Search

Type, Teletext Language and Scan Encrypted

options.

By pressing “• ” or “ ” button, select the country

you want to set and press “ ” button to highlight

Search Type option. Use “ ” or “ ” to set the

desired search type. Available search types are

digital only, analog TV only and full.

When set, press “• ” to select Teletext Language.

Use “ ” or “ ” to select the desired Teletext

Language.

Press “• ” button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want to

scan coded stations.

Press • OK button on the remote control to continue

and the following message will be displayed on the

screen:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 65F8200-T Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info