Bedienungsanleitung Finlux 65F8200-T (Seite 40 von 51) (Englisch)

584094

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

English - 39 -

Poor Picture: Have you selected the correct TV

system? Is your TV set or house aerial located too

close to a non-earthed audio equipment or neon

lights, etc.? Mountains or high buildings can cause

double pictures or ghost images. Sometimes you can

improve the picture quality by changing the direction

of the aerial. Is the picture or teletext unrecognisable?

Check if you have entered the correct frequency.

Please retune the channels. The picture quality may

degrade when two peripherals are connected to the

TV at the same time. In such a case, disconnect one

of the peripherals.

No Picture: Is the aerial connected properly? Are the

plugs connected tightly to the aerial socket? Is the

aerial cable damaged? Are suitable plugs used to

connect the aerial? If you are in doubt, consult your

dealer. No Picture means that your TV is not receiving

a transmission. Have you selected the correct button

on the remote control? Try once more. Also make sure

the correct input source has been selected.

Sound: You can not hear any sound. Did you perhaps

interrupt the sound, pressing the button? Sound is

coming from only one of the speakers. Is the balance

set to one extreme? See Sound Menu.

Remote Control: Your TV no longer responds to the

remote control. Perhaps the batteries are exhausted.

If so you can still use the local buttons on the TV.

Input Sources: If you cannot select an input source,

it is possible that no device is connected. Check

the AV cables and connections if you have tried to

connect a device.

Recording Unavailable: To record a programme, you

should rst connect a USB disk to your TV while the

TV is switched off. You should then switch on the TV to

enable recording feature. Otherwise, recording feature

will not be available. If you cannot perform recording,

try switching off the TV and then re-inserting the USB

device while the TV is switched off.

USB Is too Slow: If “USB is too slow” message is

displayed on the screen while starting a recording,

try restarting the recording. If you still get the same

error, it is possible that your USB disk does not meet

the speed requirements. Try connecting another

USB disk.

Wireless Network Not Available: Ensure that the

firewalls of your network allows the TV wireless

connection. “Veezy 100” usb wifi dongle(sold

separately) should be plugged properly (if available).

If the wireless network does not function properly,

try using the wired network in your home. Refer to

the Wired Connection section for more information

on the process.

If the Net TV does not function, check the modem

(router) rst. If the router does not have a problem,

check the internet connection of your modem.

Try searching for wireless networks again, using the

Network Settings menu screen.

Connection is Slow: See the instruction book

of your wireless modem to get information on the

internal service area, connection speed, signal quality

and other settings. You need to have a high speed

connection for your modem.

Distruption during playback or slow reactions:

You could try the following in such a case: Keep

at least three meters distance from microwave ovens,

mobile telephones, bluetooth devices or any other

Wi-Fi compatible devices. Try changing the active

channel on the WLAN router.

Internet Connection Not Available / DLNA Mode

Not Operating: If the MAC address (a unique

identier number) of your PC or modem has been

permanently registered, it is possible that your TV

might not connect to the internet. In such a case, the

MAC address is authenticated each time when you

connect to the internet. This is a precaution against

unauthorized access. Since your TV has its own

MAC address, your internet service provider cannot

validate the MAC address of your TV. For this reason,

your TV cannot connect to the internet. Contact your

internet service provider and request information on

how to connect a different device, such as your TV,

to the internet.

It is also possible that the connection may not be

available due to a firewall problem. If you think

this causes your problem, contact your internet

service provider. A rewall might be the reason of a

connectivity and discovery problem while using the TV

in DLNA mode or while browsing via DLNA.

Invalid Domain: Ensure that you have already logged

on to your PC with an authorized username/password

and also ensure that your domain is active, prior to

sharing any les in your DLNA server program on your

PC. If the domain is invalid, this might cause problems

while browsing les in DLNA mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux 65F8200-T Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info