Bedienungsanleitung Finlux FL3220 (Seite 21 von 27) (Englisch)

683724

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

English - 49 -

Connectivity

Wired Connectivity

To Connect to a Wired Network

• You must have a modem/router connected to an

active broadband connection.

• Connect your PC to your modem/router. This can

be a wired or wireless connection.

• Connect your TV to your modem/router via an

ethernet cable. There is a LAN port at the rear

(back) of your TV.

Broadband ISP connection

LAN (ethernet) cable

LAN input on the rear

side of the TV

To configure wired settings please refer to

the Network/Internet Settings section in the

System>Settings Menu.

• You might be able to connect your TV to your LAN

depending on your network’s conguration. In such

a case, use an ethernet cable to connect your TV

directly to the network wall outlet.

LAN input on the rear

side of the TV

network

wall socket

Conguring Wired Device Settings

Network Type

The Network Type can be selected as Wired Device,

Wireless Device or Disabled, in accordance with the

active connection to the TV set. Select this as Wired

Device if you are connecting via an ethernet.

Internet Speed Test

Highlight Internet Speed Test and press the OK but-

ton. TV will check the internet connection bandwidth

and display the result when complete.

Advanced Settings

Highlight Advanced Settings and press the OK

button. On the next screen you can change the IP

and DNS settings of the TV. Highlight the desired one

and press Left or Right button to change the setting

from Automatic to Manual. Now you can enter the

Manual IP and / or Manual DNS values. Select the

related item in the drop down menu and enter the

new values using the numeric buttons of the remote.

Press the OK button to save settings when complete.

Wireless Connectivity

To Connect to a Wireless Network

The TV cannot connect to the networks with a hidden

SSID. To make your modem’s SSID visible, you should

change your SSID settings via the modem’s software.

To Connect to a wireless LAN, you should perform

the following steps:

• To congure your wireless settings please refer

to the Network/Internet Settings section in the

System>Settings Menu.

Broadband

ISP

connection

A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands is designed to

increase bandwidth. These are optimized for smoother

and faster HD video streaming, le transfers and

wireless gaming.

• The frequency and channel differ depending on

the area.

• The transmission speed differs depending on the

distance and number of obstructions between the

transmission products, the conguration of these

products, the radio wave conditions, the line trafc

and the products that you use. The transmission may

also be cut off or may get disconnected depending

on the radio wave conditions, DECT phones or any

other WiFi 11b appliances. The standard values of

the transmission speed are the theoretical maximum

values for the wireless standards. They are not the

actual speeds of data transmission.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FL3220 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FL3220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info