Bedienungsanleitung Finlux FL3223 SMART (Seite 26 von 33) (Englisch)

683726

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English - 54 -

• The Wireless LAN adaptor should be connected

directly to the TV’s USB port. USB hubs are not

supported. You can plug your wi dongle into a

extension dock in cases where network quality is

poor and the wi dongle needs to be placed to a

location with better signal quality.

• The Wireless LAN adaptor supports 802.11 a,b,g & n

type modems. It is highly recommended that you should

use the IEEE 802.11n communication protocol in order

to avoid any possible problems while watching videos.

• Use the other USB input, if you experience problems

with audio/video performance.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use a

wired connection if you experience problems with a

wireless connection.

Conguring Wireless Device Settings

To enable Wi-Fi features, plug in the Wi-Fi dongle to one

of the USB ports. Open the Network/Internet Settings

menu and select Network Type as Wireless Device to

start connection process.

The TV will scan the wireless networks automatically.

A list of available networks will be displayed. Please

select your desired network from the list.

Note: If the modem supports N mode, you should set N

mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual keyboard.

You can use this keyboard via the directional buttons and

the OK button on the remote control.

Wait until the IP address is shown on the screen.

This means that the connection is now established. To

disconnect from a wireless network, highlight Network

Type and press Left or Right buttons to set as

Disabled.

Highlight Internet Speed Test and press the OK button

to check your internet connection speed. Highlight

Advanced Settings and press the OK button to open

the advanced setting menu. Use directional and numeric

buttons to set. Press the OK button to save settings

when complete.

Other Information

The status of the connection will be displayed as

Connected or Not Connected and the current IP

address, if a connection is established.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you can connect

it to your TV via a router, in order to access the content

in your device. For this, your mobile device must have

an appropriate sharing software.

• Connect to your router following the steps stated above

in the Wireless Connectivity section.

• Afterwards, engage your mobile device with the router and

then activate the sharing software on your mobile device.

Then, select les that you want to share with your TV.

• If the connection is established correctly, you will be

able to access the shared les from your mobile device

via the Media Browser of your TV.

• Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile device and press the OK button to continue.

• If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile

devices.

Wake ON

Wake-on-LAN (WoL) is a standard that allows a device

to be turned on or woken up by a network message.

The message is sent to the device by a program

executed on a remote device connected to the same

local area network, such as a smartphone.

Your TV is WoL compatible. To enable this feature set

the Wake On option in the Network/Internet Settings

menu as On. It is necessary that both the device, from

which the network message will be sent to the TV, and

the TV are connected to the same network. Wake On

feature is only supported for Android OS devices and

can only be used via YouTube and Netix applications.

In order to use this feature the TV and the remote

device should be connected at least once while the TV

is on. If the TV is powered off, the connection should be

reestablished, the next time it is switched on. Otherwise

this feature will be unavailable. This does not apply,

when the TV is switched into the standby mode.

The performance of some devices in the market, may

vary due to the software architecture. In order to use

Wake On feature with a better performance, please

make sure that your device has latest rmware version.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any rewalls of your network allow the

TV wireless connection.

• Try searching for wireless networks again, using the

Network/Internet Settings menu screen.

If the wireless network does not function properly, try

using the wired network in your home. Refer to the

Wired Connectivity section for more information on

the process.

If the TV does not function using the wired connection,

check the modem (router). If the router does not have a

problem, check the internet connection of your modem.

Connection is Slow

See the instruction book of your wireless modem to

get information on the internal service area, connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FL3223 SMART Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FL3223 SMART

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info