Bedienungsanleitung Finlux FL3224 (Seite 8 von 12) (Englisch)

613217

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

English - 21 -

TV Menu Features and Functions

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture

mode can be set to one of these options: Cinema, Game, Dynamic and Natural.

Contrast Sets contrast level of the screen.

Brightness

Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the color saturation.

Power Save Mode

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

Backlight

(Optional)

This setting controls the backlight level. The backlight function will be inactive if the

Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media

Browser mode or while the picture mode is set to Game.

Noise Reduction

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction

setting to reduce the amount of noise.

Advanced Settings

Dynamic Contrast You can change the Dynamic Contrast ratio to desired value.

Colour Temp Sets the color temperature.

Picture Zoom

Sets the desired picture size from picture zoom menu.

Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low

voltage switching)

HDMI True

Black(optional)

While watching from HDMI source, this feature will be visible in the Picture Settings

menu. You can use this feature to enhance blackness in the picture

Film Mode

Films are recorded at a different number of frames per second to normal television

programmes.Turnthisfeatureonwhenyouarewatchinglmstoseethefast

motion scenes clearly.

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift With this option you can adjust the color shift to green or to red.

RGB Gain

YoucancongurethecolourtemperaturevaluesusingtheRGBGainfeature.

Reset Resets the picture settings to factory default settings.(Except Game Mode)

Autoposition (in

PC mode)

Automatically optimizes the display. Press OK to optimize.

H Position (in PC

mode)

This item shifts the image horizontally to the right hand side or left hand side of the

screen.

V Position (in PC

mode)

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock (in PC

mode)

Dot Clock adjustments correct the interference that appear as vertical banding

in dot intensive presentations like spreadsheets or paragraphs or text in smaller

fonts.

Phase (in PC

mode)

Depending on the resolution and scan frequency that you input to the TV set, you

may see a hazy or noisy picture on the screen. In such a case you can use this

item to get a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will

be added to the Picture Settings while in PC mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FL3224 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FL3224

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info