Bedienungsanleitung Finlux FL5526UHD (Seite 30 von 33) (Englisch)

683750

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English - 57 -

• The transmission speed differs depending on the

distance and number of obstructions between the

transmission products, the conguration of these

products, the radio wave conditions, the line trafc

and the products that you use. The transmission may

also be cut off or may get disconnected depending

on the radio wave conditions, DECT phones or any

other WiFi 11b appliances. The standard values of

the transmission speed are the theoretical maximum

values for the wireless standards. They are not the

actual speeds of data transmission.

• The location where the transmission is most effective

differs depending on the usage environment.

• The Wireless feature of the TV supports 802.11 a,b,g

& n type modems. It is highly recommended that you

should use the IEEE 802.11n communication protocol

in order to avoid any possible problems while watching

videos.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use

a wired connection if you experience problems with a

wireless connection.

Conguring Wireless Device Settings

Open the Network/Internet Settings menu and select

Network Type as Wireless Device to start connection

process.

The TV will scan the wireless networks automatically.

A list of available networks will be displayed. Please

select your desired network from the list.

Note: If the modem supports N mode, you should set N

mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual

keyboard. You can use this keyboard via the directional

buttons and the OK button on the remote control.

Wait until the IP address is shown on the screen.

This means that the connection is now established.

To disconnect from a wireless network, highlight

Network Type and press Left or Right buttons to set

as Disabled.

Highlight Internet Speed Test and press the OK button

to check your internet connection speed. Highlight

Advanced Settings and press the OK button to open

the advanced setting menu. Use directional and numeric

buttons to set. Press the OK button to save settings

when complete.

Other Information

The status of the connection will be displayed as

Connected or Not Connected and the current IP

address, if a connection is established.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you can connect

it to your TV via a router, in order to access the content

in your device. For this, your mobile device must have

an appropriate sharing software.

• Connect to your router following the steps stated above

in the Wireless Connectivity section.

• Afterwards, engage your mobile device with the router

and then activate the sharing software on your mobile

device. Then, select les that you want to share with

your TV.

• If the connection is established correctly, you will be

able to access the shared les from your mobile device

via the Media Browser of your TV.

• Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile device and press the OK button to continue.

• If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile

devices.

Wireless Display

Wireless Display is a standard for streaming video and

sound content by Wi-Fi Alliance. This feature provides

the ability to use your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

Plug the wireless USB dongle to TV rst, if the TV

doesn’t have internal WiFi feature.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, please refer to the instruction manual of your

mobile device for detailed information.

Scan for devices. After you select your TV and

connect, the screen of your device will be displayed

on your TV.

Note: This feature can be used only if the mobile device

supports this feature. Scanning and connecting processes

differ according to the programme you use. Android based

mobile devices should have the software version V4.2.2

and above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FL5526UHD Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FL5526UHD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info