Bedienungsanleitung Finlux FLD2222 (Seite 9 von 20) (Englisch)

613220

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English - 31 -

not be available to be played on a computer. You can

play the recordings only via your TV.

Note: Lip Sync delay may occur during the timeshifting.

Radio record is supported. The TV can record

programmes up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient, the recording may fail and thetimeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not plug out the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartition support is available. The maximum of two

differentpartitionsaresupported.Therstpartitionofthe

USB disk is used for PVR ready features. It also must

be formatted as the primary partition to be used for the

PVR ready features.

Some stream packets may not be recorded because

of signal problems, so sometimes video may freezes

during playback.

Record, Play, Pause, Display (for PlayListDialog) keys

can not be used when teletext is ON. If a recording starts

from timer when teletext is ON, teletext is automatically

turned off. Also teletext usage is disabled when there is

an ongoing recording or playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded to

the connected USB disk.

Press (PLAY) button again to resume the paused

programme from where you stopped. Press the STOP

button to stop timeshift recording and return to the live

broadcast.

Note: Timeshift cannot be used while in radio mode.

Note : You cannot use the timeshift fast reverse feature

before advancing the playback with the fast forward

option.

Instant Recording

Press (RECORD) button to start recording an event

instantly while watching a programme. You can press

(RECORD) button on the remote control again to

record the next event on the EPG. In this case, an OSD

will be displayed, indicating the programmed events for

recording. Press (STOP) button to cancel instant

recording.

Note: You can not switch broadcasts or view the Media

Browser during the recording mode. While recording a

programme or during the timeshifting, a warning message

appears on the screen if your USB device speed is not

sufcient.

Watching Recorded Programmes

Select the Recordings Library from the Media Browser

menu. Select a recorded item from the list (if previously

recorded). Press the OK button to view the Play

Options. Select an option then press OK button.

Note: Viewing main menu and menu items will not be

available during the playback.

Press the (STOP) button to stop a playback and return

to the Recordings Library.

Slow Forward

If you press (PAUSE) button while watching recorded

programmes, the slow forward feature will be available.

You can use button to slow forward. Pressing

button consecutively will change slow forwarding speed.

RecordingConguration

SelecttheRecordingCongurationitemintheSettings

menutoconguretherecordingsettings.

Format Disk: You can use Format Disk feature for

formatting the connected USB disk. Your pin is required

to use the Format Disk feature (default pin is 0000).

Default PIN code can change depending on the

selected country.

If you are asked to enter a PIN code for viewing a menu

option, use one of the following codes: 4725, 0000 or

1234.

IMPORTANT: Note that ALL the data stored on the USB

disk will be lost and the disk format will be converted

to FAT32 if you activate this feature. If your USB disk

malfunctions, you can try formatting the USB disk. In

most cases formatting the USB disk will restore normal

operation; however, ALL the data stored on the USB disk

will be lost in such a case.

Note: If “USB is too slow” message is displayed on

the screen while starting a recording, try restarting the

recording. If you still get the same error, it is possible that

your USB disk does not meet the speed requirements.

Try connecting another USB disk.

Media Browser Menu

Youcanplayphoto,music,andmovielesstoredona

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the MENU button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and

activate

TV plays next file and loop

the list.

Start playback with OK and

activate

thesamelewillbeplayedina

loop (repeat).

Start playback with OK/ and

activate

thelewillbeplayedinashufe.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FLD2222 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FLD2222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info