Bedienungsanleitung Finlux FLD2430WK (Seite 10 von 24) (Englisch)

683751

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

English - 34 -

Note: When viewing image les the Media Browser menu

can only display 1000 image les stored on the connected

USB device.

Recording a Programme

IMPORTANT: When using a new USB hard disk

drive,itisrecommendedthatyourstformatthedisk

using your TV’s “Format Disk” option in the Media

Browser>Settings>Recording Settings menu.

Torecordaprogramme,youshouldrstconnectaUSB

disk to your TV while the TV is switched off. You should

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free

space and be USB 2.0 compatible. If the USB drive is

not compatible an error message will be displayed.

To record long duration programmes such as movies, it

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

onto a computer; however, these les will not be

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting. Radio

record is supported. The TV can record programmes

up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient,therecordingmayfailandthetimeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not pull out the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartition support is available. A maximum of two

differentpartitionsaresupported.Therstpartitionof

the USB disk is used for PVR ready features. It also

must be formatted as the primary partition to be used

for the PVR ready features.

Some stream packets may not be recorded because

of signal problems, as a result sometimes videos may

freeze during playback.

Record, Play, Pause, Display (for PlayListDialog) keys

can not be used when teletext is on. If a recording starts

from timer when teletext is on, teletext is automatically

turned off. Also teletext usage is disabled when there

is an ongoing recording or playback.

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded to

the connected USB disk.

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You cannot use the timeshift fast reverse feature before

advancing the playback with the fast forward option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can press

Record button on the remote control again to record

the next event after selecting the next programme

from within the EPG. Press Stop button to cancel

instant recording.

You can not switch broadcasts or view the Media

Browser during the recording mode. While recording a

programme or during the timeshifting, a warning message

appears on the screen if your USB device speed is not

sufcient.

Watching Recorded Programmes

Select the Recordings from the Media Browser

menu. Select a recorded item from the list (if previously

recorded). Press the OK button to view the Play

Options. Select an option then press OK button.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Rapid advance button to slow forward.

Pressing Rapid advance button consecutively will

change slow forwarding speed.

Note: Viewing main menu and menu items will not be available

during the playback. Please also note that previously set

recording timer/s will not function while using the Recordings

menu.

Recording Conguration

Select the Recording Settings item in the Media

Browser>Settingsmenutoconguretherecording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

IMPORTANT: Formatting your USB drive will erase

ALLthedataonitandit’slesystemwillbeconverted

toFAT32.Inmostcasesoperationerrorswillbexed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux FLD2430WK Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finlux FLD2430WK

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info