Bedienungsanleitung Firefriend BQ-6394 (Seite 8 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

549781

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

!!!DANGER!!!

1. NEVER store an extra gas cylinder underneath or close to the barbecue

or in conned spaces.

2. NEVER ll the gas cylinder over 80%. Overlling a gas cylinder is

dangerous, because excess gas can leak out of the safety valve. Gas

can escape from the safety valve causing a re.

3. The connection openings of the gas cylinder must be provided with

protective covers.

4. In case you discover a gas leak in the extra gas cylinder, immediately

keep your distance and call the re department.

VERY IMPORTANT: DISCONNECT THE GAS CYLINDER WHEN

THE BARBECUE IS NOT IN USE.

DISCONNECTING THE GAS CYLINDER:

• Turn o all knobs.

• Completely close the gas tap of the gas cylinder (turn clockwise until

the knob stops).

• Remove the pressure regulator from the gas tap by turning the quick-

connect nut counterclockwise.

• Replace the protective cover on the gas tap of the gas cylinder.

LEAK TEST

GENERAL

All gas connections of the barbecue are tested for leaks in the factory prior

to shipment. Nevertheless, when mounting the device it must be checked

entirely for gas leaks, because of possible damages during transportation

or due to exposure to extreme pressure. Regularly check the device for

leakage, or check whether you can smell any gas.

BEFORE CHECKING:

• Make sure to remove all packing materials from the barbecue, including

the straps keeping the burner in its place.

• Do not smoke while checking for leakage.

• Never check for leakage with open re.

• Prepare a solution of water and soap of one part detergent and one

part water. Use a spray can, brush or cloth to apply the solution to the

connections. Make sure the gas cylinder is full before the rst leak test.

• Checking for leaks must be performed outdoors on a well-ventilated

spot, away from ignition sources such as gas or electrical devices and

combustible materials.

• Keep the barbecue away from open re and/or sparks during the test.

CHECKING:

• Make sure all control knobs are set to position “OFF”.

• Make sure the pressure regulator is properly connected to the gas cylinder.

• Completely open the gas tap of the gas cylinder by turning the knob

counter-clockwise. In case you hear a hissing sound, IMMEDIATELY turn

o the gas; this indicates a serious leak in the connection. Contact your

gas supplier or re department.

• Check each connection of the gas cylinder all the way through to the

taps part (the hose leading to the burner) by spraying or brushing the

soap solution on the connections.

• There is a leak when soap bubbles appear. IMMEDIATELY close the gas

tap of the gas cylinder and carefully check all connections. Open the gas

tap again and perform a new check.

• Always close the gas tap of the gas cylinder after the leak test by turning

the knob clockwise.

• Only use the parts recommended by the manufacturer for this

barbeque. The warranty will become void when using other parts. Do

not use the barbeque until all connections are inspected and you are

certain these show no signs of leakage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Firefriend BQ-6394 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info