Bedienungsanleitung First Alert DVR0810 (Seite 18 von 47) (Englisch)

795161

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Page 18

BASIC OPERATION

RECORDING

Recording

RECORD Mode

Conﬁgure Recording Options:

You have three recording modes: Schedule, Manual and Stop.

By default, the DVR is set to record by schedule.

To set the recording options, right click from the mouse and click on RECORD

MODE. There you can select amongst the three options for each individual

channel. Or you can highlight ALL to make a change to all channels at once.

SCHEDULE: System will record according to schedule that is set.

MANUAL: System always records. System records

not matter what settings are in place.

STOP: System does not record , no matter what other parameters are set.

RECORD Settings

In order to set the record settings, from the Main Menu,

click RECORD. Set parameters as follows:

1. Under RESOLUTION, select CIF, HD1, or D1 or QCIF. NOTE:

Channels 1 & 2 allows options D1, HD1, CIF and QCIF.;

Channels 3-8: allow settings of CIF and QCIF.

2. FRAMERATE: Choose the recording frame rate 1-30, (fps – frames per

second). The lower the value, the less life-like and more jerky the recorded

movements will be. However, a lower frame rate uses less HDD space.

Make your choice depending on the precision with which you want to follow

the events being recorded. Frame-rate of each channel can be adjusted

but is limited by the total resources available. The total frame rate for all

channels combined cannot exceed 420 (NTSC) fps. The ratios of D1, HD1

and CIF are as follows: 1 D1= 4 x CIF, 1 HD1 = 2 x CIF.QCIF=1/4 CIF.

3. QUALITY, The quality rating is on a 6 point scale.

The selections are 6-High, 5,4,3,2,1-Low.

4. AUDIO, select On to enable or disable. If audio recording is enabled, the

system will record audio from connected audio capable cameras (not

included). See caution statement on audio recording in Video section.

Detailed Settings for RECORD Mode:

Select RECORD CONFIG. The RECORD CONFIG screen will appear. From

this screen, you have the ability to select a schedule or manually record. Also,

you may select to stop recording, which will disable the recording feature.

To schedule a recording:

1. Select a channel and then highlight SCHEDULE

2. Set the Period Times for up to 4 period settings by using the virtual

mouse and setting the start and stop times for each period.

3. Click check box for SCHEDULE, DETECT(motion detect) or ALARM

to enable the appropriate recording type. Click NEXT PAGE to

adjust cameras 5 through 8. Click OK to save and exit.

4. Copy the setting (if desired) to another or all channels as desired.

5. Click OK. to save settings.

6. Record Size: Using the virtual mouse, set

the RECORD SIZE from 1-120 minutes.

7. Click ok to conﬁrm selections. Audio/Video Recording

Caution: Audio surveillance in some states is illegal

or requires permission from one or both parties to

record someone’s voice. Laws are also different

from residential vs. commercial applications. Some

federal, state, and local laws prohibit certain surveillance activi-

ties and/or the use or distribution of the information obtained from

such activities. Prior to using this system, you should become

familiar with the pertinent laws to ensure compliance with those

applicable to surveillance activities.

Record Mode

Record Conﬁguration

Record

Main Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

First Alert DVR0810 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info