Bedienungsanleitung First Alert PRO-D1610 (Seite 19 von 48) (Englisch)

795212

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 19

Basic Operation

Recording

Recording Schedule (TIMER RECORD) Example

Privacy Mask Field

MASK FIELD lets you block a speciﬁc portion of a channel you do not want

recorded or shown on the display screen. This can be useful if you need to

conceal a sensitive area being captured by the camera. To use the Privacy Mask

Field:

1. From the Record menu, click MASK FIELD. The Mask Field menu opens.

2. Choose a channel you wish to apply the Mask Field.

3. Select ON from the SWITCH drop-down menu.

4. Click SETUP. The Mask menu will be replaced by the full-screen camera view

of the desired channel. Using the mouse, click and drag the cursor over the

area you want to conceal. A single click will produce a small black square.

5. Right-click anywhere on the screen to return to the Mask Field menu.

6. Click APPLY. Click OK in the REMARK window. Click EXIT.

Motion Detect Setup

You can conﬁgure motion detection for each channel (Camera) connected to the

DVR. To conﬁgure motion detection:

1. From the Main Menu click DEVICES. Then click MOTION.

2. Under STATUS, select ON to enable motion detection for the desired chan-

nel. Scroll down for additional channels. Note: If in the RECORD screen a

Channel is set to OFF, MOTION is also disabled for that Channel.

3. Under SENSITIVITY, select 1 through 8. The higher the number, the more

sensitive the motion detection.

4. Under MD AREA, click SETUP. The red motion grid appears over the se-

lected channel in full screen.

5. Click the blocks in the grid to enable/disable motion detection. Red=motion

detection enabled; Clear=motion detection disabled.

6. Right-click anywhere on the screen to return to the Motion Detection menu.

7. Click EMAIL, then select ON/OFF to turn on e-mail notiﬁcation. E-mail must

be conﬁgured. See manual for details.

8. Click APPLY. Click OK in the REMARK window. .

When MD is triggered, in the Live View Screen you will see a red【M】in the

Channel with a MD warning. You may also see a【R】if you set up the channel

to record when an alarm is triggered.

You want your system to record continuously on all channels from 9 AM to 5 PM Monday to

Friday. You also want Alarm/Motion recording from 5 PM to 9 AM. You do not want the

system to record Saturday or Sunday:

1. Open the Schedule menu.

2. Under CHANNEL, select ALL.

3. Click the blue NO RECORD block be-

low the grid. A checkmark will appear

in the block.

4. Under SUN, click blocks 00~23. The

blocks will turn blue.

5. Under FROM, select SUN. Under TO

select SAT, and then click COPY.

6. Click the red ALARM block below the

grid.

7. Under MON, click blocks 00~08 and

blocks 17~23. The blocks will turn red.

8. Under FROM, select MON. Under TO

select TUE, and then click COPY. Repeat

for Wednesday, Thursday, and Friday. Your completed schedule should the same as

the schedule to the right.

9. Click APPLY. Click OK in the REMARK window. Click EXIT in all menus until all windows

are closed.

Recording Schedule

Motion Detect Menu

Motion Detect Grid

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

First Alert PRO-D1610 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info