Bedienungsanleitung Fit Remote Display (Seite 21 von 40) (Englisch)

803537

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

INSTRUCTION MANUAL FIT REMOTE DISPLAY

Time

You can use the Clock menu to change the current time. You can change the numbers by pressing the – or + on the

level of assistance button. You can use the selector button to select the number you wish to change. You need to

press on the selector button to save the selected time and exit the Clock menu. If you press Cancel, you exit the menu

without saving any changes.

Date

You can use the Date menu to change the current date. You can change the numbers by pressing the – or + on the

level of assistance button. You can use the selector button to select the number you wish to change. You need to

press on the selector button to save the selected date and exit the menu. If you press Cancel, you exit the menu

without saving any changes.

Units

You can use the Units menu to choose between the metric and imperial system. The following units are changed:

Measured variable Metric Imperial

Distance km mi

Speed km/h mph

Energy consumption Wh/km Wh/mi

Temperature °C °F

Height above sea level m.a.s.l. FAMSL

Time format

You can switch between 12h and 24h time display.

Menu – Connectivity

You will find information on the availability and use of connectable accessories on the e-bike manufacturer’s website.

Menu – My Bike

You can make adjustments to the user-related settings in this menu.

Assistance

You can custom-adjust e-bike assistance. You can use the selector button to configure the required assistance in

the Assistance menu. The configured Assistance setting always has a similar impact on the three levels (ECO, STD

and AUTO). The motor always delivers full assistance when set to “HIGH” irrespective of the individual assistance

setting. If all bars on the screen are black, the maximum assistance is configured in the ECO, STD and AUTO levels

of assistance. This setting means a shorter range. If only the bar on the far left of the screen is black, the maximum

assistance is configured in the ECO, STD and AUTO levels of assistance. This setting allows the maximum possible

range in the ECO assistance mode. Press the selector button to save the setting.

Calibration Altitude

The altimeter is calibrated in the Calibration Altitude menu. Important: Altitude measurement depends on the air

pressure and deviations may arise if the air pressure fluctuates. We recommend calibrating the altimeter if there is a

sudden change in the weather.

Auto Backlight

You can use this menu to select between the display backlight automatically adjusted to the ambient light (ON) or the

display backlight manually adjusted within a range between 10 and 100% (OFF).

You need to press on the selector button to save the selected backlight and exit the menu. If you press Cancel, you

exit the menu without saving the settings.

FIT_Manual_Remote_Display_V1_en | Version 01 | 04.04.2022 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fit Remote Display Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fit Remote Display

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info