Bedienungsanleitung Flex VCE45 L AC (Seite 18 von 256) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

505252

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

– 4

Caution

The flat pleated filter must must always be

in place while vacuuming.

– If wet dirt is vacuumed with the uphol-

stery or crevice nozzle (option) or if wa-

ter is sucked up from a container it is

recommended to deactivate the "auto-

matic filter dedusting" function.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the flat

folded filter with the filter cleaning.

Clean the electrodes with a brush.

Clean the container with a damp rag

and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

Î Plug in the main plug.

Î Switch on the appliance at the main switch.

Î Set the suction output (min - max) at the

rotary switch.

ƽ Danger

Risk of injury and damage! The socket out-

let is only for the connection of power tools

to the vacuum cleaner. Any other use of the

socket outlet is not permitted.

Î Connect the mains plug of the electric

power tool to the vacuum cleaner.

Î Switch on the appliance at the main

switch.

Indicator lamp is on; vacuum cleaner is in

the standby mode.

Note: The vacuum cleaner is turned on and off

automatically with the electric power tool.

Note: The vacuum cleaner starts automat-

ically within 0.5 seconds and continues to

run for 15 seconds after the power tool has

being switched off.

Note: Please refer to "Technical specifica-

tions" for the power connection specifica-

tions of the power tools.

Illustration

Î Adjust the stepped power tool adaptor to

fit the connection of the electric power

tool.

Illustration

Î Attach the stepped power tool adaptor

to the suction hose.

Illustration

Î Connect the adaptor to the electric pow-

er tool.

The appliance has an innovative filter

cleaning system that is particularly effective

with fine dust. The flat pleated filter is auto-

matically cleaned every 15 seconds

through an air jet (pulsating sound).

Note: Automatic filter dedusting is switched

on at the factory.

Note: The automatic filter dedusting func-

tion can only be switched on/ off when the

appliance is switched on.

– To switch off automatic filter cleaning:

Î Activate the switch. Indicator lamp in

the switch goes off.

– To switch on automatic filter cleaning:

Î Press the switch again. Indicator lamp

in the switch glows green.

Î Switch off the appliance at the main switch.

Î Pull out the mains plug.

General

Clip connection

Operation

Turning on the Appliance

Adjust the suction output

Working with electrical power tools

Automatic filter cleaning

Turn off the appliance.

18 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flex VCE45 L AC Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info