FLINQ
HANDMADE
ROPE LAMP 2.5 METER
FQC8148
V1 User Manual
2.5MT Rope Light
Dear Customer, before use please read this manual carefully and follow the instructions as
provided. Keep these instructions for later use.
Step 1: Check if all parts are included (as the picture) and prepare a screwdriver, wire cutter,
drill and scissors (if needed). Cut of the plastic insulation 6-8mm from the power wire to see the
metal wire’s inside.
Step 2: Install the mounting bracket to the ceiling with the plug’s and screws and mark it on the
preferred location.
Step 3,4, 5 and 6: Put the 4 wires through the hole from the black top cover and add the ground
wire with the connection part in the middle of the metal screw fixations so it is earthed well.
Then add the white separate Thule around the wire’s for protection and insulation.
Step 7: Switch off the main power and connect the 3 wire’s with the terminal block that’s
included. First connect the wire’s with the same colors together, 2x brown and 2x blue. Then
connect the 2x Brown (live wire +) to the L connection by pressing the button’s on the terminal
block and release when connected well. Do the same for the 2x Blue (neutral wire -) to the N
connection and Yellow/Green (earth wire) to the earth connection. Now fix the black top cover
to the mounting bracket and install tightly with the screws. Turn ON the main power and switch
the light ON.
HEMP LIGHT
