Bedienungsanleitung Flir T1020 (Seite 98 von 276) (Englisch)

677853

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

Changing settings

◦ Save & add table: The table annotation tool will be displayed. This setting also allows

you to define the type of table. Available options are the default table templates. You

can also create your own table in FLIR Tools/Tools+ and upload it to the camera.

◦ Save & add voice annotation: The voice annotation tool will be displayed.

◦ Save & add sketch: The sketch annotation tool will be displayed.

◦ Save & add any annotation: The annotation tool menu will be displayed.

• Image resolution: This setting defines the resolution of the images captured by the cam-

era. Available options are Normal and Ultramax. For more information, see section

14.1.4 About UltraMax, page 47.

• Video compression: This setting defines the storage format for video clips. Available

options are:

◦ Mpeg (*.mpeg): MPEG recordings cannot be edited after the file has been saved.

◦ Radiometric storage (*.csq): A CSQ file supports full radiometry but is only sup-

ported by FLIR Systems software. The file does not include any visual image infor-

mation. With this setting, only Thermal image mode is supported when recording

video.

• Photo as separate JPEG: A visual image is always saved in the same JPEG file as the

thermal image. Enabling this setting saves an extra visual image as a separate JPEG

file.

• File naming format: This setting defines the naming format for new image/video files.

The setting has no impact on already saved files in the archive. Available options are:

◦ DCF: DCF (Design rule for Camera File system) is a standard that specifies the nam-

ing method of image files (and much more). With this setting, the name of a saved

image/video file will be FLIRxxxx, where xxxx is a unique counter. Example:

FLIR0001.

◦ Date prefix: A prefix will be added to the file name, including the date and the text

“IR_” for images and “MOV_” for videos. Examples: IR_2015-04-22_0002 and

MOV_2015-04-22_0003. The date format will follow the Date & time format setting,

see section 25.1.5 Device settings, page 85.

Note With the Date prefix setting, the files may not automatically be detected by

third-party applications.

• Delete all saved files...: This displays a dialog box where you can choose to perma-

nently delete all the saved files (images, videos, and reports) from the memory card or

to cancel the delete action.

25.1.4 Programmable buttons

There are four programmable buttons. For more information, see section 13.11 Assigning

functions to the programmable buttons, page 37.

• P Button: This setting assigns a function to the hardware button

• P2 Button: This setting assigns a function to the hardware button

• P3 Button (on screen): This setting assigns a function to the software button P3 on the

screen.

• P4 Button (on screen): This setting assigns a function to the software button P4 on the

screen.

Available options for all programmable buttons:

• No action: This is the default setting. Nothing will happen when you push/press the

button.

#T559954; r. AL/37426/37426; en-US

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flir T1020 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info