Bedienungsanleitung Florabest FAAS 10.8 A2 - IAN 109793 (Seite 12 von 35) (Deutsch, Englisch, Holländisch)

722886

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

12 GB/IE

Start-up / Maintenance and Cleaning / Service / Warranty … / … / Translation of the original declaration of conformity / Manufacturer

2. Apply sideways pressure to the sabre saw,

bending it so the foot plate

touches the

wall sideways.

3. Switch on the tool and saw through the work

piece, applying consistent pressure.

A2) Plunge sawing (see Fig. F):

CAUTION! RISK OF KICK-BACK! Only

plunge saw soft work pieces (wood, etc.).

1. Place the bottom edge of the sabre saw shoe

onto the work piece.

Switch on the tool.

2. Tip the sabre saw forward and plunge the saw

blade into the work piece.

3. Straighten the sabre saw into a vertical posi-

tion and continue cutting along the cutting line.

B) Using the holding bracket (see Fig. G):

Move the saw, applying slight downward pressure.

Maintenance and Cleaning

Always disconnect the mains plug from the

socket and remove the battery pack

before

cleaning.

Always remove the saw blade before working

on the power tool.

Always keep the tool and the ventilation louvres

clean. Clogged ventilation louvres may result in

the tool overheating and/or being damaged.

Clean the tool after ﬁnishing work.

Do not allow liquids to enter the tool. Please

use a soft cloth for cleaning the housing. Never

use petrol, solvents or cleaning agents that at-

tack plastic.

Clean the saw blade holder, if necessary using

a brush or blowing out with compressed air.

When storing a lithium-ion battery for extended

periods, regularly check the charge. The optimal

charge is between 50 % and 80 %. The optimal

storage climate is cooling and dry.

Service

Only have your tool

repaired by qualified professionals,

and only using original manufacturer

parts. This will maintain the safety of the tool.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch. Your

statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

and repaired parts. Any damage and defects extant

on purchase must be reported immediately after

unpacking the appliance, at the latest, two days after

the purchase date. Repairs made after the expiration

of the warranty period are subject to payment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Florabest FAAS 10.8 A2 - IAN 109793 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info