630794
12
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
12
GB IE
ing obstructions in the ejection chan-
nel;
- Before checking, cleaning or work-
ing on the equipment;
- If a foreign body is struck. Look for
damage to the equipment and carry
out the necessary repairs before re-
starting and working with the equip-
ment;
- If the equipment starts to vibrate unu-
sually strongly, an immediate check
is required.
Switch off the engine, take out the
spark plug connector and ensure that
all moving parts are still:
- When leaving the equipment;
- Before refuelling;
Close the throttle valve when stopping
the engine.
Do not leave the equipment unattended
in the workplace.
Do not work with equipment that is
damaged or incomplete or has been
converted without the approval of the
manufacturer.
Using machines for applications other
than those intended may result in dan-
gerous situations.
Maintenance and Storage:
Ensure that all nuts, bolts and screws
are tightened rmly and the equipment
is in safe working condition. Many
accidents are caused by poorly main-
tained equipment.
Do not keep the equipment with petrol
in the tank inside a building in which
petrol fumes could potentially come
into contact with open re or sparks.
Allow the engine to cool before plac-
ing the equipment in enclosed spaces.
Risk of re.
To avoid the risk of re, keep the en-
gine, exhaust and area around the fuel
tank free of grass, leaves or leaking
grease (oil).
Check the grass catcher regularly for
wear or loss of function.
For reasons of safety, replace worn
or damaged parts. Replace defective
silencers.
If the fuel tank is to be drained, do this
outdoors.
Handle your equipment with care.
Keep the tools sharp and clean to
enable you to work better and more
safely. Follow the maintenance direc-
tions.
Do not attempt to repair the equipment
yourself unless you are trained to do
so. Any work not specied in these
instructions is to be carried out only by
customer service centres authorised by
us.
Keep the equipment in a dry place and
out of reach of children. Machines are
dangerous if used by inexperienced
people.
Initial Operation
Caution! Risk of injury from
rotating blades. Carry out
work on the equipment only
when the blade is switched
off and stationary.
Observe the Briggs & Stratton in-
struction manual supplied.
Before starting the equipment, you must
- Mounting the grip rod
- Install the grass collection box / mulch
kit
- Install the starter cord
- Fill with engine oil
- Fill with petrol
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

florabest-fbm-575-b1---ian-93561

Suche zurücksetzen

  • Sehr geehrte Damen und Herren
    Bei meinem FLORABEST 575A Rasenmäher habe ich folgendes Problem
    Wie entferne ich den Messerflansch/Messerhalter (mit Keilriemenführung) von der Motorwelle Eingereicht am 23-4-2019 08:43

    Antworten Frage melden
  • Sehr geehrte Damen und Herren
    Bei meinem FLORABEST 575A Rasenmäher habe ich folgendes Problem
    Wie entferne ich den Messerflansch (mit Keilriemenführung) von der Motorwelle Eingereicht am 23-4-2019 08:41

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Florabest FBM 575 B1 - IAN 93561 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info