576716

Florabest FBS 43 B2 - IAN 97786 Seite 50

50
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
45
FBS 43 B2
GB
WARNING!
■ Petrol is highly fl ammable. Only store petrol in the containers
provided.
■ Only refuel out in the open and do not smoke.
■ The fi ller cap must not be opened and refuelling must not take
place while the engine is running or when the device is hot.
■ Do not attempt to start the engine if the petrol has overfl owed.
Instead, remove the device from the area polluted by petrol. Do not
attempt to restart the device until the petrol fumes have dissipated.
■ For reasons of safety, the petrol tank and fi ller cap must be replaced
if they are damaged.
Before use
IMPORTANT!
■ When mowing/trimming, always wear non-slip safety boots and
proper safety clothing, such as work gloves, a protective helmet,
a protective mask or protective glasses and hearing protection.
■ Check the area in which the device is to be used and remove any
objects that may be caught and slung away.
■ Before use and after dropping or other impacts, always visually
inspect the device to check whether the cutting tool, mounting bolts
and the entire cutting unit is damaged. Worn or damaged cutting
tools and mounting bolts must be replaced.
■ Always perform a visual inspection prior to use to check whether
the cutting tool is worn or damaged. To prevent imbalance, worn or
damaged cutting tools and mounting bolts may only be replaced in
sets.
Limit the noise development and vibrations to a minimum!
■ Only use devices that are in good condition.
■ Maintain and clean the device on a regular basis.
■ Adapt your working method to the device.
■ Do not overload the device.
■ Have the device inspected if necessary.
■ Switch the device off when not in use.
■ Wear gloves.
Safety measures when handling the cutting blade
■ The device may cause blindness and injuries to bystanders. Maintain a
minimum distance of 15 metres in all directions between the device and
other persons or animals.
■ Do not use the device if any of the cutting blade accessories have not
been properly installed.
■ The cutting blade can be catapulted away from objects with force.
This can lead to arm or leg injuries. If the device comes into contact
with a foreign body, immediately shut down the engine and wait until
the cutting blade has come to a complete stop. Check the cutting blade
for damage. Always replace the cutting blade if it is bent or torn.
■ The cutting blade forcefully slings away objects as well as soil. This may
cause blindness or injuries. Wear eye, face and leg protection. Always
remove objects from the work area before using the cutting blade.
■ The cutting blade continues to run down once the throttle lever has
been released. A cutting blade that is running down to a stop may
cause cutting injuries to you or bystanders. Turn the engine off and
make sure that the cutting blade has come to a complete stop before
performing any work on the cutting blade.
Initial operation
Assembly
Assembling the guide handle (Fig. 3a - 3c)
■ Assemble the guide handle as shown in fi gures 3a - 3c. The guide
handle must be installed as displayed in fi gures 3a - 3c. Only tighten
the handle screw once you have adjusted the shoulder strap to the
optimal operating position (see "Putting on the shoulder strap/adjusting
the cutting height" chapter).
■ To adjust the guide handle the correct distance from the body and to
ensure that there is suffi cient distance between the engine and yourself,
loosen the two screws on the underside of the guide handle (see
fi g. 8j).
Assembling the guide rail (4a - 4c)
■ Press the locking lever and slide the guide rail (see fi g. 4a) into
the guide rail connecting piece . Make sure that the drive shafts inside
the guide rail slide into each other, lightly turn the line spool /the
cutting blade / if necessary. The locking lever hook must engage
with the slot . Tighten the handle screw as displayed in fi gure 4c.
Assembling the cutting blade protective hood
WARNING!
■ The cutting blade protective hood must be assembled when working
with the cutting blade. The cutting blade protective hood
is attached
to the guide rail
using 2 screws as displayed in fi gure 5.
Installing/replacing the cutting blade
■ Install/replace the cutting blade / as displayed in fi gures 6a - 6g.
■ Lock the cutting blade / to the drive plate (see fi g. 6c).
■ Insert the pressure plate via the splined shaft thread (see fi g. 6d).
■ Attach the pressure plate cover (see fi g. 6e).
■ Locate the drive plate drill hole, align with the underlying groove and
lock with the enclosed hexagonal key , now tighten the nut with
the spark plug spanner (see fi g. 6f + 6g).
NOTE! Left-hand thread!
■ The cutting blades / are delivered with plastic protective caps.
These must be removed prior to use and reattached when not in use.
IMPORTANT!
SHARP EDGES, WEAR PROTECTIVE GLOVES
■ ATTENTION! Assemble the cutting line protective hood on the
cutting blade protective hood .
■ The cutting line protective hood must be assembled when working
with the cutting line. The cutting line protective hood is assembled as
displayed in fi gure 7a.
■ Ensure that the cutting line protective hood is correctly engaged.
A blade
is located on the inner side of the cutting line protective
hood (see fi g. 7a). This is covered with a protective sleeve (see
fi g. 7a).
■ Remove the protective sleeve before starting work and reattach after
completing your activities.
IB_97786_FBS43B2_LB1.indb 45 03.07.14 15:16
… 50 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

florabest-fbs-43-b2---ian-97786

Suche zurücksetzen

  • je cherche un reservoir d essence pour une d ebroussailleuse fbs 43 b 2 Eingereicht am 2-11-2021 12:00

    Antworten Frage melden

  • Muss man den Rasentrimmer ab und an laden? Auch im Winter Eingereicht am 24-2-2017 16:15

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Florabest FBS 43 B2 - IAN 97786 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info