Bedienungsanleitung Florabest FHEHS 900 A1 - IAN 270705 (Seite 22 von 29) (Deutsch, Englisch)

819962

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

18 FHEHS 900 A1

Appliance-speciﬁc safety instructions for pole

pruners

■ Always wear a hard hat, hearing protection and safety gloves. Also

wear eye protection to prevent splashes of oil or saw dust from falling

into your eyes. Wear a dust mask to protect yourself from dust.

■ Never use the appliance while standing on a ladder.

■ Do not lean too far forwards while using the appliance. Ensure you are

standing ﬁrmly and keep your balance at all times. Use the supplied

carrying strap to spread the weight evenly on the body.

■ Wear sturdy, non-slip boots.

■ Do not use the appliance in the rain.

■ Do not use the appliance near overhead power lines. Ensure a minimum

distance of 10 m to overhead power lines.

■ Do not stand under the branches that you want to cut oﬀ, to avoid

injuries due to falling branches. Be aware of branches that may spring

back, to avoid injuries. Work at an angle of approximately 60°.

■ Be aware that the appliance can kick back.

■ Keep an eye not only on the branches being cut, but also on falling

material, to avoid tripping.

■ After 30 minutes’ work, take a break of at least one hour.

■ Always wear safety gloves.

■ Disconnect the appliance from the power supply in the event of a faulty

power cord, after completion of the work or for cleaning.

■ Cover the guide rail and the chain during transport during transport

and storage using the cover.

■ Do not use the appliance in a potentially explosive environment con-

taining ﬂammable liquids, gases or dusts. The sparks generated by the

machine could ignite the vapours or gases.

■ The power outlet used must be suitable for the plug. To avoid electrical

shocks, never try to modify the plug.

■ Never remove the plug from the power supply by pulling on the power

cord. Always pull the plug itself. Do not drag or carry the appliance

using the power cord. Keep power cord away from heat, oil, sharp

edges or moving parts.

■ Avoid unintentional starting of the appliance.

■ Appliances with defective switches must be repaired immediately to

avoid damage or injuries.

■ Store the appliance outside of the reach of children. Only those who

are fully acquainted with the operator’s manual and the appliance itself

may operate the appliance.

■ Maintain power tools carefully. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that may aﬀect

the power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power

tools.

■ Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to

control.

■ Therefore, have the appliance checked by qualiﬁed specialists.

Use only the replacement parts recommended by the manufacturer.

Precautions against kickback

CAUTION KICKBACK!

► Be aware of the danger of kickback when working with the appliance.

There is a risk of personal injury. You can avoid kickbacks by being

careful and using the correct sawing technique.

■ Contact with the tip of the rail can, in some cases, lead to an unexpected

rearwards reaction resulting in the guide rail ﬂying upwards towards the

operator (see Fig. A).

Fig. A

■ Kickbacks can occur if the tip of the guide rail touches an object or if

the wood bends and the saw chain gets caught in the cut (see Fig. B).

Fig. B

■ If the saw chain jams in the upper edge of the guide rail, the rail can

kick back violently towards the operator.

■ Any such reaction can lead to you losing control over the saw and

possibly injuring yourself. Do not rely solely on the chainsaw’s built-in

safety devices. As the user of a chainsaw, you can take a number

of measures to avoid accidents and injury. A kickback is caused by

incorrect use or misuse of the power tool. It can be avoided by taking

proper precautions as given below.

■Hold the saw ﬁrmly with both hands, with your thumb and ﬁnger

around the handles of the chainsaw. Hold your body and arms in

a position in which you can withstand kickback forces. If suitable

measures are taken, the operator can control the recoil forces. Never

let go of the chainsaw.

■Avoid an abnormal posture and do not saw above shoulder height.

This will prevent inadvertent contact with the tip of the rail and allows

a better control of the chainsaw in unexpected situations.

■Always use the replacement rails and saw chains speciﬁed by the

manufacturer. Incorrect replacement rails and saw chains can lead to

a tearing of the saw chain and/or kickback.

■Follow the manufacturer’s instructions for sharpening and mainte-

nance of the saw chain. Setting the depth stop too low can increase

the risk of kickback.

■Do not saw with the tip of the blade. This can lead to a kickback.

■Ensure that there are no objects on the ground that you can trip

over.

Bild 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Florabest FHEHS 900 A1 - IAN 270705 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info